- Home
- Machinery Directive
- History of the Machinery Directive 2006/42/EC
- Machinery directive 2006/42/EC
- Whereas of machinery directive 2006/42/EC
- Articles of machinery directive 2006/42/EC
- Article 1 of machinery directive 2006/42/EC - Scope
- Article 2 of machinery directive 2006/42/EC - Definitions
- Article 3 : Specific Directives of machinery directive 2006/42/EC
- Article 4 : Market surveillance of machinery directive 2006/42/EC
- Article 5 : Placing on the market and putting into service - machinery directive 2006/42/EC
- Article 6 : Freedom of movement - machinery directive 2006/42/EC
- Article 7 : Presumption of conformity and harmonised standards - machinery directive 2006/42/EC
- Article 8 : Specific measures - machinery directive 2006/42/EC
- Article 9 : Specific measures to deal with potentially hazardous machinery - machinery directive 2006/42/EC
- Article 10 : Procedure for disputing a harmonised standard - machinery directive 2006/42/EC
- Article 11 : Safeguard clause - machinery directive 2006/42/EC
- Article 12 : Procedures for assessing the conformity of machinery - machinery directive 2006/42/EC
- Article 13 : Procedure for partly completed machinery - 2006/42/EC
- Article 14 : Notified bodies - machinery directive 2006/42/EC
- Article 15 : Installation and use of machinery - machinery directive 2006/42/EC
- Article 16 : CE marking - machinery directive 2006/42/EC
- Article 17 : Non-conformity of marking - machinery directive 2006/42/EC
- Article 18 : Confidentiality - machinery directive 2006/42/EC
- Article 19 : Cooperation between Member States - machinery directive 2006/42/EC
- Article 20 : Legal remedies - machinery directive 2006/42/EC
- Article 21 : Dissemination of information - machinery directive 2006/42/EC
- Article 22 : Committee - machinery directive 2006/42/EC
- Article 23 : Penalties - machinery directive 2006/42/EC
- Article 24 : Amendment of Directive 95/16/EC - machinery directive 2006/42/EC
- Article 25 : Repeal - machinery directive 2006/42/EC
- Article 26 : Transposition - machinery directive 2006/42/EC
- Article 27 : Derogation - machinery directive 2006/42/EC
- Article 28 : Entry into force - machinery directive 2006/42/EC
- Article 29 : Addressees - machinery directive 2006/42/EC
- ANNEX I of machinery directive 2006/42/EC - Summary
- GENERAL PRINCIPLES of annex 1 of machinery directive 2006/42/EC
- 1 ESSENTIAL HEALTH AND SAFETY REQUIREMENTS of annex 1 - definitions - machinery directive 2006/42/EC
- Article 1.1.2. Principles of safety integration of annex 1 machinery directive 2006/42/EC
- Article 1.1.3. Materials and products annex 1 machinery directive 2006/42/EC
- Article 1.1.4. Lighting - annex 1 machinery directive 2006/42/EC
- Article 1.1.5. Design of machinery to facilitate its handling - annex 1 machinery directive 2006/42/EC
- Article 1.1.6. Ergonomics - annex 1 machinery directive 2006/42/EC
- Article 1.1.7. Operating positions - annex 1 machinery directive 2006/42/EC
- Article 1.1.8. Seating - annex 1 machinery directive 2006/42/EC
- Article 1.2.1. Safety and reliability of control systems - annex 1 of machinery directive 2006/42/EC
- Article 1.2.2. Control devices - annex 1 of machinery directive 2006/42/EC
- Article 1.2.3. Starting - annex 1 of machinery directive 2006/42/EC
- Article 1.2.4. Stopping - annex 1 of machinery directive 2006/42/EC
- Article 1.2.4.4. Assembly of machinery - Annex 1 of machinery directive 2006/42/EC
- Article 1.2.5. Selection of control or operating modes - annex 1 of machinery directive 2006/42/EC
- Article 1.2.6. Failure of the power supply - annex 1 of machinery directive 2006/42/EC
- Article 1.3. PROTECTION AGAINST MECHANICAL HAZARDS - annex 1 of machinery directive 2006/42/EC
- Article 1.4. REQUIRED CHARACTERISTICS OF GUARDS AND PROTECTIVE DEVICES - annex 1 of machinery directive 2006/42/EC
- Article 1.5. RISKS DUE TO OTHER HAZARDS - annex 1 of machinery directive 2006/42/EC
- Article 1.6. MAINTENANCE - annex 1 of machinery directive 2006/42/EC
- Article 1.7. INFORMATION - annex 1 of machinery directive 2006/42/EC
- Article 2. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS - annex 1 machinery directive 2006/42/EC
- Article 3. SUPPLEMENTARY ESSENTIAL HEALTH TO THE MOBILITY OF MACHINERY - annex 1 machinery directive 2006/42/EC
- Article 4. SUPPLEMENTARY REQUIREMENTS TO OFFSET HAZARDS DUE TO LIFTING OPERATIONS of machinery directive 2006/42/EC
- Article 5. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR UNDERGROUND WORK of machinery directive 2006/42/EC
- Article 6. SUPPLEMENTARY REQUIREMENTS - HAZARDS DUE TO THE LIFTING OF PERSONS of machinery directive 2006/42/EC
- Annex II : Declarations of CONFORMITY OF THE MACHINERY, DECLARATION OF INCORPORATION - machinery directive 2006/42/EC
- Annex III of machinery directive 2006/42/EC - CE marking
- Annex IV of machinery directive 2006/42/EC
- Annex V of machinery directive 2006/42/EC
- Annex VI of machinery directive 2006/42/EC
- Annex VII - Technical file for machinery - machinery directive 2006/42/EC
- Annex VIII - Assessment of conformity of machinery directive 2006/42/EC
- Annex IX of machinery directive 2006/42/EC - EC type-examination
- Annex X of machinery directive 2006/42/EC - Full quality assurance
- Annex XI of machinery directive 2006/42/EC - Minimum criteria for the notification of bodies
- Annex XII of machinery directive 2006/42/EC - Correlation table between machinery directive 2006/42/CE and MD 1998/37/CE
- Machinery directive 1998/37/EC
- considerings of machinery directive 1998/37/CE
- articles of 1998/37/EC machinery directive
- Annex I of 1998/37/CE machinery directive
- Annex II of 1998/37/EC machinery directive
- Annex III of machinery directive 1998/37/CE
- Annex IV of machine directive 1998/37/EC
- Annex V of machines directive 1998/37/CE
- Annex VI of machines directive 1998/37/EC
- Annex VII of machines directive 1998/37/EC
- Annex VIII of 1998/37/CE machine directive
- Annex IX of machinery directive 1998/37/CE
- Machinery directive 1989/392/EC
- whereas of machinery directive machines 1989/392/EEC
- articles of machinery directive 1989/392/EEC
- Annex I of machinery directive 1989/392/EEC
- Annex II of machine directive 1989/392/EEC
- Annex III of machinery directive 1989/392/EEC
- Annex IV of machinery directive 1989/392/EEC
- Annex V of machinery directive 1989/392/EEC
- Annex VI of machine directive 1989/392/EEC
- Annexe VII of machinery directive 1989/392/EEC
- Amendments of 1989/392/EEC directive
- ATEX directives
- ATEX 94/9/EC directive
- Whereas of ATEX 94/9/CE directive
- Articles of ATEX 94/9/CE directive
- article 1 ATEX 94/9/EC directive
- article 2 ATEX 94/9/EC directive
- article 3 ATEX 94/9/EC directive
- article 4 : ATEX 94/9/EC directive
- article 5 : ATEX 94/9/EC directive
- article 6 : ATEX 94/9/EC directive
- article 7 : ATEX 94/9/EC directive
- article 8 ATEX 94/9/EC directive
- article 9 : ATEX 94/9/EC directive
- article 10 : ATEX 94/9/EC directive
- article 11 : ATEX 94/9/EC directive
- article 12 : ATEX 94/9/EC directive
- article 13 : ATEX 94/9/EC directive
- article 14 : ATEX 94/9/EC directive
- article 15 : ATEX 94/9/EC directive
- article 16 : ATEX 94/9/EC directive
- ANNEX I of ATEX 94/9/EC directive : CRITERIA DETERMINING THE CLASSIFICATION OF EQUIPMENT-GROUPS INTO CATEGORIES
- ANNEX II of ATEX 94/9/EC : directive ESSENTIAL HEALTH AND SAFETY REQUIREMENTS -EHSR
- ANNEX III of ATEX 94/9/EC directive : MODULE EC-TYPE EXAMINATION
- ANNEX IV of ATEX 94/9/EC directive : MODULE PRODUCTION QUALITY ASSURANCE
- ANNEX V of ATEX 94/9/EC directive : MODULE PRODUCT VERIFICATION
- ANNEX VI of ATEX 94/9/EC directive : MODULE CONFORMITY TO TYPE
- ANNEX VII of ATEX 94/9/EC directive : MODULE PRODUCT QUALITY ASSURANCE
- ANNEX VIII of ATEX 94/9/EC directive : MODULE INTERNAL CONTROL OF PRODUCTION
- ANNEX IX of ATEX 94/9/EC directive : MODULE UNIT VERIFICATION
- ANNEX X of ATEX 94/9/EC directive : CE Marking - Content of the EC declaration of conformity
- ANNEX XI of ATEX 94/9/EC directive: NOTIFICATION OF BODIES
- ATEX 99/92/EC Directive
- ATEX DIRECTIVE 2014/34/UE
- whereas of 2014/34/UE ATEX directive
- Articles of ATEX 2014/34/UE directive
- Annex 1 of ATEX 2014/34/UE directive
- Annex 2 of the ATEX 2014/34/UE directive
- Annex 3 of ATEX 2014/34/UE directive
- Annex 4 of ATEX 2014/34/UE directive
- Annex 5 of ATEX 2014/34/UE directive
- Annex 6 of ATEX 2014/34/UE directive
- Annex 7 of ATEX 94/9/EC directive
- Annex 8 of the ATEX 2014/34/UE directive
- Annex 9 of the ATEX 2014/34/UE directive
- Annex 10 of ATEX 2014/34/UE directive
- Annex 11 of ATEX 2014/34/UE directive
- Annex 12 of the ATEX 2014/34/UE directive
- Audits in Ex field - EN 13980, OD 005 and EN ISO/CEI 80079-34
- New ATEX directive
- RASE european project
- ATEX 94/9/EC directive
- IECEX
- Standardization & European Regulation
- Safety of machines : Standardization and European regulations
- European regulation for machines - standardization for machines - harmonized standards
- Standardization in machinery
- EN ISO 12100 - Décembre 2010
- EN ISO 12100-1 - January 2004
- EN ISO 12100-1:2003/A1
- EN ISO 12100-2 November 2003
- EN ISO 12100-2:2003/A1
- EN ISO 14121-1 September 2007
- ISO/TR 14121-2 - 2007
- EN 50205:2002 standard - Relays with forcibly guided (mechanically linked) contacts
- ISO 11161:2007
- ISO 13849-1:2006
- ISO 13849-2:2012
- ISO 13850:2006 - Safety of machinery -- Emergency stop -- Principles for design
- ISO 13851:2002 - Safety of machinery -- Two-hand control devices -- Functional aspects and design principles
- ISO 13854:1996 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
- ISO 13855:2010 - Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body
- ISO 13856-1:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles
- ISO 13856-2:2013 - Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for design testing
- ISO 13856-3:2013 Safety of machinery -- Pressure-sensitive protective devices - Part 3: General principles for design
- ISO 13857:2008 Safety of machinery -- Safety distances to prevent hazard zones
- ISO 14118:2000 - Safety of machinery -- Prevention of unexpected start-up
- ISO 14119:2013- Interlocking devices associated with guards
- ISO 14120:2002 - Guards -- General requirements for the design and construction
- ISO 14122-1:2001 - Permanent means of access to machinery
- ISO 14122-2:2001 - Permanent means of access to machinery
- ISO 14122-4:2004 - Permanent means of access to machinery
- ISO 14123-1:1998 - Reduction of risks to health from hazardous substances emitted by machinery
- ISO 14123-2:1998 - Reduction of risks to health from hazardous substances emitted by machinery
- ISO 14159:2002 - Hygiene requirements for the design of machinery
- ISO 19353:2005 -- Fire prevention and protection
- ISO/AWI 17305 - Safety of machinery - Safety functions of control systems
- ISO/DTR 22100-2 - Safety of machinery -- Part 2: How ISO 12100 relates to ISO 13849-1
- ISO/TR 14121-2:2012 - Risk assessment - Part 2: Practical guidance
- ISO/TR 18569:2004 - Guidelines for the understanding and use of safety of machinery standards
- ISO/TR 23849:2010 - Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems
- STABILITY DATES FOR Machinery STANDARDS
- harmonized standards list - machinery-directive 2006/42/CE
- Publication of harmonised standards for machinery directive 2006/42/EC - 9.3.2018
- Harmonized standard list - machinery directive 2006/42/EC - 9.6.2017
- Harmonized standards for machinery - OJ C 2016/C173/01 of 15/05/2016
- Harmonized standards for machinery -OJ C 2016/C14/102 of 15/01/2016
- Harmonized standards for machinery - corrigendum OJ C 2015/C 087/03 of 13/03/2015
- harmonized standards for machinery - OJ C 2015/C 054/01 of 13/02/2015
- Application guide for machinery directive 2006/42/EC
- Guide to application of the machinery directive 2006/42/CE - July 2017
- Guide to application of the Machinery Directive 2006/42/EC - second edition June 2010
- Guide to application of machinery directive - 1-2 : The citations
- Guide to application of machinery directive - § 3 to § 31 The Recitals
- Guide to application of machinery directive - § 32 to § 156 - The Articles
- Guide to application of machinery directive - § 157 to § 381 - Annex I
- Guide to application of machinery directive - § 382 to § 386 - ANNEX II Declarations
- Guide to application of machinery directive - § 387 - ANNEX III CE marking
- recommendation for use - machinery directive 2006/42/EC
- Notified bodies under the machinery directive 2006/42/CE
- Safety of Ex, ATEX and IECEx equipments : Standardization
- Standardization in Ex Field
- The transposition of the ATEX 94/9/EC Directive to the 2014/34/EU directive
- harmonized standards list - ATEX directive 2014/34/EU
- Harmonized standard list for ATEX 2014/34/UE - 12-10-2018
- Harmonized standard list for ATEX 2014/34/UE - 15.6.2018
- Harmonized standard list for ATEX 2014/34/UE - 12-07-2019
- Harmonized standard list for ATEX 2014/34/UE - 9.6.2017
- Harmonized standards list ATEX 2014/34/UE directive - OJ C 126 - 08/04/2016
- Guide to application of the ATEX Directive 2014/34/EU
- application guide of 2014/34/EU directive - preambule, citations and recitals
- Guide to application of the ATEX 2014/34/UE directive - THE ARTICLES OF THE ATEX DIRECTIVE
- Guide to application of the ATEX 2014/34/UE directive - ANNEX I CLASSIFICATION INTO CATEGORIES
- Guide to application of the ATEX 2014/34/UE directive - ANNEX II ESSENTIAL HEALTH AND SAFETY REQUIREMENTS
- Guide to application of the ATEX 2014/34/UE directive - ANNEX III MODULE B: EU-TYPE EXAMINATION
- Guide to application of the ATEX 2014/34/UE directive - ANNEX IV MODULE D: CONFORMITY TO TYPE
- Guide to application of machinery directive - § 388 - ANNEX IV machinery and mandatory certification
- Guide to application of the ATEX 2014/34/UE directive - ANNEX V MODULE F: CONFORMITY TO TYPE
- Alignment of ten technical harmonisation directives - Decision No 768/2008/EC
- ATEX 94/9/EC directive documents
- ATEX 94/9/EC guidelines
- ATEX 94/9/EC guidelines 4th edition
- 1 INTRODUCTION of ATEX 94/9/EC guidelines 4th edition
- 2 OBJECTIVE OF THE ATEX DIRECTIVE 94/9/EC - ATEX 94/9/EC guidelines 4th edition
- 3 GENERAL CONCEPTS of ATEX 94/9/EC directive ATEX 94/9/EC guidelines 4th edition
- 4 IN WHICH CASES DOES DIRECTIVE 94/9/EC APPLY - ATEX 94/9/EC guidelines 4th edition
- 5 EQUIPMENT NOT IN THE SCOPE OF DIRECTIVE 94/9/EC - ATEX 94/9/EC guidelines 4th edition
- 6 APPLICATION OF DIRECTIVE 94/9/EC ALONGSIDE OTHERS THAT MAY APPLY - ATEX 94/9/EC guidelines 4th edition
- 7 USED, REPAIRED OR MODIFIED PRODUCTS AND SPARE PARTS - ATEX 94/9/EC guidelines 4th edition
- 8 CONFORMITY ASSESSMENT PROCEDURES - ATEX 94/9/EC guidelines 4th edition
- 9 NOTIFIED BODIES - ATEX 94/9/EC guidelines 4th edition
- 10 DOCUMENTS OF CONFORMITY - ATEX 94/9/EC guidelines 4th edition
- 11 MARKING - CE marking -ATEX 94/9/EC guidelines 4th edition
- 12 SAFEGUARD CLAUSE AND PROCEDURE - ATEX 94/9/EC guidelines 4th edition
- 13 EUROPEAN HARMONISED STANDARDS - ATEX 94/9/EC guidelines 4th edition
- 14 USEFUL WEBSITES - ATEX 94/9/EC guidelines 4th edition
- ANNEX I: SPECIFIC MARKING OF EXPLOSION PROTECTION - ATEX 94/9/EC guidelines 4th edition
- ANNEX II: BORDERLINE LIST - ATEX PRODUCTS - ATEX 94/9/EC guidelines 4th edition
- ATEX 94/9/EC guidelines 4th edition
- Harmonized standards list - ATEX 94/9/EC directive
- Harmonized standards list ATEX 94/9/EC directive - OJ C 126 - 08/04/2016
- Harmonized standards list ATEX 94/9/EC - OJ C 335 - 09/10/2015
- Harmonized standards list ATEX 94/9/EC - OJ-C 445-02 - 12/12/2014
- Harmonized standards list ATEX 94/9/EC - OJ-C 076-14/03/2014
- Harmonized standards list ATEX 94/9/EC - OJ-C 319 05/11/2013
- ATEX 94/9/EC guidelines
- European regulation for ATEX 94/9/EC ATEX directive
- Guide to application of ATEX 2014/34/EU directive second edition
- Safety of machines : Standardization and European regulations
- Latest news & Newsletters
- Functional safety
- Terms and definitions for functional safety
- Safety devices in ATEX
- The SAFEC project
- main report of the SAFEC project
- Appendix 1 of the SAFEC project - guidelines for functional safety
- Appendix 2 of the SAFEC project
- ANNEX A - SAFEC project - DERIVATION OF TARGET FAILURE MEASURES
- ANNEX B - SAFEC project - ASSESSMENT OF CURRENT CONTROL SYSTEM STANDARDS
- ANNEX C - safec project - IDENTIFICATION OF “USED SAFETY DEVICES”
- Annex D - SAFEC project - study of ‘ Used Safety Devices’
- Annex E - Determination of a methodology for testing, validation and certification
- EN 50495 standard for safety devices
- The SAFEC project
- Safety components in Machinery
- STSARCES - Standards for Safety Related Complex Electronic Systems
- STSARCES project - final report
- STSARCES - Annex 1 : Software engineering tasks - Case tools
- STSARCES - Annex 2 : tools for Software - fault avoidance
- STSARCES - Annex 3 : Guide to evaluating software quality and safety requirements
- STSARCES - Annex 4 : Guide for the construction of software tests
- STSARCES - Annex 5 : Common mode faults in safety systems
- STSARCES - Annex 6 : Quantitative Analysis of Complex Electronic Systems using Fault Tree Analysis and Markov Modelling
- STSARCES - Annex 7 : Methods for fault detection
- STSARCES - Annex 8 : Safety Validation of Complex Components - Validation by Analysis
- STSARCES - Annex 9 : safety Validation of complex component
- STSARCES - Annex 10 : Safety Validation of Complex Components - Validation Tests
- STSARCES - Annex 11 : Applicability of IEC 61508 - EN 954
- STSARCES - Annex 12 : Task 2 : Machine Validation Exercise
- STSARCES - Annex 13 : Task 3 : Design Process Analysis
- STSARCES - Annex 14 : ASIC development and validation in safety components
- Functional safety in machinery - EN 13849-1 - Safety-related parts of control systems
- STSARCES - Standards for Safety Related Complex Electronic Systems
- History of standards for functional safety in machinery
- Basic safety principles - Well-tried safety principles - well tried components
- Functional safety - detection error codes - CRC and Hamming codes
- Functional safety - error codes detection - parity and chechsum
- Functional safety and safety fieldbus
- ISO 13849-1 and SISTEMA
- Prevention of unexpected start-up and machinery directive
- Self tests for micro-controllers
- Validation by analysis of complex safety systems
- basic safety principles - safety relays for machinery
- Download center
- New machinery regulation
- Revision of machinery directive 2006/42/EC
- security for machines
harmonised standards for PPE Directive 89/686/EEC - 2014/C 110/03
11.4.2014 |
EN |
Official Journal of the European Union |
C 110/77 |
Commission communication in the framework of the implementation of the Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2014/C 110/03
ESO |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard |
CEN |
EN 132:1998 Respiratory protective devices — Definitions of terms and pictograms |
4.6.1999 |
EN 132:1990 |
Date expired (30.6.1999) |
CEN |
EN 133:2001 Respiratory protective devices — Classification |
10.8.2002 |
EN 133:1990 |
Date expired (10.8.2002) |
CEN |
EN 134:1998 Respiratory protective devices — Nomenclature of components |
13.6.1998 |
EN 134:1990 |
Date expired (31.7.1998) |
CEN |
EN 135:1998 Respiratory protective devices — List of equivalent terms |
4.6.1999 |
EN 135:1990 |
Date expired (30.6.1999) |
CEN |
EN 136:1998 Respiratory protective devices — Full face masks — Requirements, testing, marking |
13.6.1998 |
EN 136:1989 EN 136-10:1992 |
Date expired (31.7.1998) |
EN 136:1998/AC:2003 |
|
|
|
|
CEN |
EN 137:2006 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking |
23.11.2007 |
EN 137:1993 |
Date expired (23.11.2007) |
CEN |
EN 138:1994 Respiratory protective devices — Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly — Requirements, testing, marking |
16.12.1994 |
|
|
CEN |
EN 140:1998 Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking |
6.11.1998 |
EN 140:1989 |
Date expired (31.3.1999) |
EN 140:1998/AC:1999 |
|
|
|
|
CEN |
EN 142:2002 Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking |
10.4.2003 |
EN 142:1989 |
Date expired (10.4.2003) |
CEN |
EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking |
24.1.2001 |
EN 143:1990 |
Date expired (24.1.2001) |
EN 143:2000/A1:2006 |
21.12.2006 |
Date expired (21.12.2006) |
||
EN 143:2000/AC:2005 |
|
|
|
|
CEN |
EN 144-1:2000 Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector |
24.1.2001 |
EN 144-1:1991 |
Date expired (24.1.2001) |
EN 144-1:2000/A1:2003 |
21.2.2004 |
Date expired (21.2.2004) |
||
EN 144-1:2000/A2:2005 |
6.10.2005 |
Date expired (31.12.2005) |
||
CEN |
EN 144-2:1998 Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections |
4.6.1999 |
|
|
CEN |
EN 144-3:2003 Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen |
21.2.2004 |
|
|
EN 144-3:2003/AC:2003 |
|
|
|
|
CEN |
EN 145:1997 Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking |
19.2.1998 |
EN 145:1988 EN 145-2:1992 |
Date expired (28.2.1998) |
EN 145:1997/A1:2000 |
24.1.2001 |
Date expired (24.1.2001) |
||
CEN |
EN 148-1:1999 Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection |
4.6.1999 |
EN 148-1:1987 |
Date expired (31.8.1999) |
CEN |
EN 148-2:1999 Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection |
4.6.1999 |
EN 148-2:1987 |
Date expired (31.8.1999) |
CEN |
EN 148-3:1999 Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3 |
4.6.1999 |
EN 148-3:1992 |
Date expired (31.8.1999) |
CEN |
EN 149:2001+A1:2009 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking |
6.5.2010 |
EN 149:2001 |
Date expired (6.5.2010) |
CEN |
EN 166:2001 Personal eye-protection — Specifications |
10.8.2002 |
EN 166:1995 |
Date expired (10.8.2002) |
CEN |
EN 167:2001 Personal eye-protection — Optical test methods |
10.8.2002 |
EN 167:1995 |
Date expired (10.8.2002) |
CEN |
EN 168:2001 Personal eye-protection — Non-optical test methods |
10.8.2002 |
EN 168:1995 |
Date expired (10.8.2002) |
CEN |
EN 169:2002 Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use |
28.8.2003 |
EN 169:1992 |
Date expired (28.8.2003) |
CEN |
EN 170:2002 Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use |
28.8.2003 |
EN 170:1992 |
Date expired (28.8.2003) |
CEN |
EN 171:2002 Personal eye-protection — Infrared filters — Transmittance requirements and recommended use |
10.4.2003 |
EN 171:1992 |
Date expired (10.4.2003) |
CEN |
EN 172:1994 Personal eye protection — Sunglare filters for industrial use |
15.5.1996 |
|
|
EN 172:1994/A1:2000 |
4.7.2000 |
Date expired (31.10.2000) |
||
EN 172:1994/A2:2001 |
10.8.2002 |
Date expired (10.8.2002) |
||
CEN |
EN 174:2001 Personal eye-protection — Ski goggles for downhill skiing |
21.12.2001 |
EN 174:1996 |
Date expired (21.12.2001) |
CEN |
EN 175:1997 Personal protection — Equipment for eye and face protection during welding and allied processes |
19.2.1998 |
|
|
CEN |
EN 207:2009 Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors) |
6.5.2010 |
EN 207:1998 |
Date expired (30.6.2010) |
EN 207:2009/AC:2011 |
|
|
|
|
CEN |
EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
6.5.2010 |
EN 208:1998 |
Date expired (30.6.2010) |
CEN |
EN 250:2000 Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing, marking |
8.6.2000 |
EN 250:1993 |
Date expired (19.7.2000) |
EN 250:2000/A1:2006 |
21.12.2006 |
Date expired (21.12.2006) |
||
CEN |
EN 269:1994 Respiratory protective devices — Powered fresh air hose breathing apparatus incorporating a hood — Requirements, testing, marking |
16.12.1994 |
|
|
CEN |
EN 342:2004 Protective clothing — Ensembles and garments for protection against cold |
6.10.2005 |
|
|
EN 342:2004/AC:2008 |
|
|
|
|
CEN |
EN 343:2003+A1:2007 Protective clothing — Protection against rain |
8.3.2008 |
EN 343:2003 |
Date expired (8.3.2008) |
EN 343:2003+A1:2007/AC:2009 |
|
|
|
|
CEN |
EN 348:1992 Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal |
23.12.1993 |
|
|
EN 348:1992/AC:1993 |
|
|
|
|
CEN |
EN 352-1:2002 Hearing protectors — General requirements — Part 1: Ear-Muffs |
28.8.2003 |
EN 352-1:1993 |
Date expired (28.8.2003) |
CEN |
EN 352-2:2002 Hearing protectors — General requirements — Part 2: Ear-plugs |
28.8.2003 |
EN 352-2:1993 |
Date expired (28.8.2003) |
CEN |
EN 352-3:2002 Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet |
28.8.2003 |
EN 352-3:1996 |
Date expired (28.8.2003) |
CEN |
EN 352-4:2001 Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs |
10.8.2002 |
|
|
EN 352-4:2001/A1:2005 |
19.4.2006 |
Date expired (30.4.2006) |
||
CEN |
EN 352-5:2002 Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs |
28.8.2003 |
|
|
EN 352-5:2002/A1:2005 |
6.5.2010 |
Date expired (6.5.2010) |
||
CEN |
EN 352-6:2002 Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input |
28.8.2003 |
|
|
CEN |
EN 352-7:2002 Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs |
28.8.2003 |
|
|
CEN |
EN 352-8:2008 Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs |
28.1.2009 |
|
|
CEN |
EN 353-2:2002 Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line |
28.8.2003 |
EN 353-2:1992 |
Date expired (28.8.2003) |
CEN |
EN 354:2010 Personal fall protection equipment — Lanyards |
9.7.2011 |
EN 354:2002 |
Date expired (9.7.2011) |
CEN |
EN 355:2002 Personal protective equipment against falls from a height — Energy absorbers |
28.8.2003 |
EN 355:1992 |
Date expired (28.8.2003) |
CEN |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards |
21.12.2001 |
EN 358:1992 |
Date expired (21.12.2001) |
CEN |
EN 360:2002 Personal protective equipment against falls from a height — Retractable type fall arresters |
28.8.2003 |
EN 360:1992 |
Date expired (28.8.2003) |
CEN |
EN 361:2002 Personal protective equipment against falls from a height — Full body harnesses |
28.8.2003 |
EN 361:1992 |
Date expired (28.8.2003) |
CEN |
EN 362:2004 Personal protective equipment against falls from a height — Connectors |
6.10.2005 |
EN 362:1992 |
Date expired (6.10.2005) |
CEN |
EN 363:2008 Personal fall protection equipment — Personal fall protection systems |
20.6.2008 |
EN 363:2002 |
Date expired (31.8.2008) |
CEN |
EN 364:1992 Personal protective equipment against falls from a height — Test methods |
23.12.1993 |
|
|
EN 364:1992/AC:1993 |
|
|
|
|
CEN |
EN 365:2004 Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
6.10.2005 |
EN 365:1992 |
Date expired (6.10.2005) |
EN 365:2004/AC:2006 |
|
|
|
|
CEN |
EN 367:1992 Protective clothing — Protection against heat and fire — Method of determining heat transmission on exposure to flame |
23.12.1993 |
|
|
EN 367:1992/AC:1992 |
|
|
|
|
CEN |
EN 374-1:2003 Protective gloves against chemicals and micro-organisms — Part 1: Terminology and performance requirements |
6.10.2005 |
EN 374-1:1994 |
Date expired (6.10.2005) |
CEN |
EN 374-2:2003 Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance to penetration |
6.10.2005 |
EN 374-2:1994 |
Date expired (6.10.2005) |
CEN |
EN 374-3:2003 Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance to permeation by chemicals |
6.10.2005 |
EN 374-3:1994 |
Date expired (6.10.2005) |
EN 374-3:2003/AC:2006 |
|
|
|
|
CEN |
EN 374-4:2013 Protective gloves against chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals |
This is the first publication |
|
|
CEN |
EN 379:2003+A1:2009 Personal eye-protection — Automatic welding filters |
6.5.2010 |
EN 379:2003 |
Date expired (6.5.2010) |
CEN |
EN 381-1:1993 Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw |
23.12.1993 |
|
|
CEN |
EN 381-2:1995 Protective clothing for users of hand-held chain saws — Part 2: Test methods for leg protectors |
12.1.1996 |
|
|
CEN |
EN 381-3:1996 Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear |
10.10.1996 |
|
|
CEN |
EN 381-4:1999 Protective clothing for users of hand-held chainsaws — Part 4: Test methods for chainsaw protective gloves |
16.3.2000 |
|
|
CEN |
EN 381-5:1995 Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors |
12.1.1996 |
|
|
CEN |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves |
16.3.2000 |
|
|
CEN |
EN 381-8:1997 Protective clothing for users of hand-held chain saws — Part 8: Test methods for chain saw protective gaiters |
18.10.1997 |
|
|
CEN |
EN 381-9:1997 Protective clothing for users of hand-held chain saws — Part 9: Requirements for chain saw protective gaiters |
18.10.1997 |
|
|
CEN |
EN 381-10:2002 Protective clothing for users of hand-held chainsaws — Part 10: Test method for upper body protectors |
28.8.2003 |
|
|
CEN |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors |
28.8.2003 |
|
|
CEN |
EN 388:2003 Protective gloves against mechanical risks |
6.10.2005 |
EN 388:1994 |
Date expired (6.10.2005) |
CEN |
EN 397:2012+A1:2012 Industrial safety helmets |
20.12.2012 |
EN 397:2012 |
Date expired (30.4.2013) |
CEN |
EN 402:2003 Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking |
21.2.2004 |
EN 402:1993 |
Date expired (21.2.2004) |
CEN |
EN 403:2004 Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking |
6.10.2005 |
EN 403:1993 |
Date expired (6.10.2005) |
CEN |
EN 404:2005 Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly |
6.10.2005 |
EN 404:1993 |
Date expired (2.12.2005) |
CEN |
EN 405:2001+A1:2009 Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking |
6.5.2010 |
EN 405:2001 |
Date expired (6.5.2010) |
CEN |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
6.10.2005 |
EN 407:1994 |
Date expired (6.10.2005) |
CEN |
EN 420:2003+A1:2009 Protective gloves — General requirements and test methods |
6.5.2010 |
EN 420:2003 |
Date expired (31.5.2010) |
CEN |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
9.7.2011 |
EN 421:1994 |
Date expired (9.7.2011) |
CEN |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
20.6.2008 |
EN 443:1997 |
Date expired (31.8.2008) |
CEN |
EN 458:2004 Hearing protectors — Recommendations for selection, use, care and maintenance — Guidance document |
6.10.2005 |
EN 458:1993 |
Date expired (6.10.2005) |
CEN |
EN 464:1994 Protective clothing — Protection against liquid and gaseous chemicals, including aerosols and solid particles — Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
16.12.1994 |
|
|
CEN |
EN 469:2005 Protective clothing for firefighters — Performance requirements for protective clothing for firefighting |
19.4.2006 |
EN 469:1995 |
Date expired (30.6.2006) |
EN 469:2005/A1:2006 |
23.11.2007 |
Date expired (23.11.2007) |
||
EN 469:2005/AC:2006 |
|
|
|
|
CEN |
EN 510:1993 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
16.12.1994 |
|
|
CEN |
EN 511:2006 Protective gloves against cold |
21.12.2006 |
EN 511:1994 |
Date expired (21.12.2006) |
CEN |
EN 530:2010 Abrasion resistance of protective clothing material — Test methods |
9.7.2011 |
EN 530:1994 |
Date expired (9.7.2011) |
CEN |
EN 564:2006 Mountaineering equipment — Accessory cord — Safety requirements and test methods |
8.3.2008 |
EN 564:1997 |
Date expired (8.3.2008) |
CEN |
EN 565:2006 Mountaineering equipment — Tape — Safety requirements and test methods |
8.3.2008 |
EN 565:1997 |
Date expired (8.3.2008) |
CEN |
EN 566:2006 Mountaineering equipment — Slings — Safety requirements and test methods |
8.3.2008 |
EN 566:1997 |
Date expired (8.3.2008) |
CEN |
EN 567:2013 Mountaineering equipment — Rope clamps — Safety requirements and test methods |
28.6.2013 |
EN 567:1997 |
Date expired (30.9.2013) |
CEN |
EN 568:2007 Mountaineering equipment — Ice anchors — Safety requirements and test methods |
8.3.2008 |
EN 568:1997 |
Date expired (8.3.2008) |
CEN |
EN 569:2007 Mountaineering equipment — Pitons — Safety requirements and test methods |
8.3.2008 |
EN 569:1997 |
Date expired (8.3.2008) |
CEN |
EN 659:2003+A1:2008 Protective gloves for firefighters |
20.6.2008 |
EN 659:2003 |
Date expired (30.9.2008) |
EN 659:2003+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 702:1994 Protective clothing — Protection against heat and flame — Test method: Determination of the contact heat transmission through protective clothing or its materials |
12.1.1996 |
|
|
CEN |
EN 795:1996 Protection against falls from a height — Anchor devices — Requirements and testing |
12.2.2000 |
|
|
EN 795:1996/A1:2000 |
24.1.2001 |
Date expired (30.4.2001) |
||
Warning: This publication does not concern the equipment described in classes A (structural anchors), C (anchor devices employing horizontal flexible lines) and D (anchor devices employing horizontal rigid anchor rails) referred to in paragraphs 3.13.1, 3.13.3, 3.13.4, 4.3.1, 4.3.3, 4.3.4, 5.2.1, 5.2.2, 5.2.4, 5.2.5, 5.3.2 (in respect of class A1), 5.3.3, 5.3.4, 5.3.5, 6 (in respect of classes A, C and D), Annex A (paragraphs A.2, A.3, A.5 and A.6), Annex B, and Annex ZA (in respect of classes A, C and D), in respect of which there shall be no presumption of conformity with the provisions of Directive 89/686/EEC. |
||||
CEN |
EN 812:2012 Industrial bump caps |
20.12.2012 |
EN 812:1997 |
Date expired (30.4.2013) |
CEN |
EN 813:2008 Personal fall protection equipment — Sit harnesses |
28.1.2009 |
EN 813:1997 |
Date expired (28.2.2009) |
CEN |
EN 863:1995 Protective clothing — Mechanical properties — Test method: Puncture resistance |
15.5.1996 |
|
|
CEN |
EN 892:2012 Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods |
20.12.2012 |
EN 892:2004 |
Date expired (30.4.2013) |
CEN |
EN 893:2010 Mountaineering equipment — Crampons — Safety requirements and test methods |
9.7.2011 |
EN 893:1999 |
Date expired (9.7.2011) |
CEN |
EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 1: Performance requirements for ventilated and non-ventilated ‘gas-tight’ (Type 1) and ‘non-gas-tight’ (Type 2) chemical protective suits |
28.8.2003 |
|
|
EN 943-1:2002/AC:2005 |
|
|
|
|
CEN |
EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 2: Performance requirements for ‘gas-tight’ (Type 1) chemical protective suits for emergency teams (ET) |
10.8.2002 |
|
|
CEN |
EN 958:2006+A1:2010 Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods |
9.7.2011 |
EN 958:2006 |
Date expired (9.7.2011) |
CEN |
EN 960:2006 Headforms for use in the testing of protective helmets |
21.12.2006 |
EN 960:1994 |
Date expired (31.12.2006) |
CEN |
EN 966:2012+A1:2012 Helmets for airborne sports |
20.12.2012 |
EN 966:2012 |
Date expired (30.4.2013) |
CEN |
EN 1073-1:1998 Protective clothing against radioactive contamination — Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination |
6.11.1998 |
|
|
CEN |
EN 1073-2:2002 Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
28.8.2003 |
|
|
CEN |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
8.3.2008 |
EN 1077:1996 |
Date expired (8.3.2008) |
CEN |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
20.12.2012 |
EN 1078:2012 |
Date expired (30.4.2013) |
CEN |
EN 1080:2013 Impact protection helmets for young children |
28.6.2013 |
EN 1080:1997 |
Date expired (31.8.2013) |
CEN |
EN 1082-1:1996 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards |
14.6.1997 |
|
|
CEN |
EN 1082-2:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail |
21.12.2001 |
|
|
CEN |
EN 1082-3:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials |
21.12.2001 |
|
|
CEN |
EN 1146:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking |
19.4.2006 |
EN 1146:1997 |
Date expired (30.4.2006) |
CEN |
EN 1149-1:2006 Protective clothing — Electrostatic properties — Part 1: Test method for measurement of surface resistivity |
21.12.2006 |
EN 1149-1:1995 |
Date expired (31.12.2006) |
CEN |
EN 1149-2:1997 Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
19.2.1998 |
|
|
CEN |
EN 1149-3:2004 Protective clothing — Electrostatic properties — Part 3: Test methods for measurement of charge decay |
6.10.2005 |
|
|
CEN |
EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements |
20.6.2008 |
|
|
CEN |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
4.6.1999 |
|
|
CEN |
EN 1384:2012 Helmets for equestrian activities |
20.12.2012 |
EN 1384:1996 |
Date expired (30.4.2013) |
CEN |
EN 1385:2012 Helmets for canoeing and white water sports |
20.12.2012 |
EN 1385:1997 |
Date expired (30.4.2013) |
CEN |
EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting |
8.3.2008 |
EN 1486:1996 |
Date expired (30.4.2008) |
CEN |
EN 1497:2007 Personal fall protection equipment — Rescue harnesses |
8.3.2008 |
|
|
CEN |
EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact — Part 1: Motorcyclists' limb joint impact protectors — Requirements and test methods |
13.3.2013 |
EN 1621-1:1997 |
Date expired (30.6.2013) |
CEN |
EN 1621-2:2003 Motorcyclists' protective clothing against mechanical impact — Part 2: Motorcyclists' back protectors — Requirements and test methods |
6.10.2005 |
|
|
EN 1621-2:2003/AC:2006 |
|
|
|
|
CEN |
EN 1731:2006 Personal eye protection — Mesh eye and face protectors |
23.11.2007 |
EN 1731:1997 |
Date expired (23.11.2007) |
CEN |
EN 1809:1997 Diving accessories — Buoyancy compensators — Functional and safety requirements, test methods |
13.6.1998 |
|
|
CEN |
EN 1827:1999+A1:2009 Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking |
6.5.2010 |
EN 1827:1999 |
Date expired (6.5.2010) |
CEN |
EN 1868:1997 Personal protective equipment against falls from a height — List of equivalent terms |
18.10.1997 |
|
|
CEN |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes |
6.11.1998 |
|
|
CEN |
EN 1938:2010 Personal eye protection — Goggles for motorcycle and moped users |
9.7.2011 |
EN 1938:1998 |
Date expired (9.7.2011) |
CEN |
EN ISO 4869-2:1995 Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
15.5.1996 |
|
|
EN ISO 4869-2:1995/AC:2007 |
|
|
|
|
CEN |
EN ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
8.3.2008 |
EN 24869-3:1993 |
Date expired (8.3.2008) |
CEN |
EN ISO 6529:2001 Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
6.10.2005 |
EN 369:1993 |
Date expired (6.10.2005) |
CEN |
EN ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
6.10.2005 |
EN 368:1992 |
Date expired (6.10.2005) |
CEN |
EN ISO 6942:2002 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
28.8.2003 |
EN 366:1993 |
Date expired (28.8.2003) |
CEN |
EN ISO 9185:2007 Protective clothing — Assessment of resistance of materials to molten metal splash (ISO 9185:2007) |
8.3.2008 |
EN 373:1993 |
Date expired (8.3.2008) |
CEN |
EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003) |
6.10.2005 |
EN 967:1996 |
Date expired (6.10.2005) |
CEN |
EN ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
13.12.2013 |
EN ISO 10819:1996 |
Date expired (13.12.2013) |
CEN |
EN ISO 10862:2009 Small craft — Quick release system for trapeze harness (ISO 10862:2009) |
6.5.2010 |
|
|
CEN |
EN ISO 11611:2007 Protective clothing for use in welding and allied processes (ISO 11611:2007) |
8.3.2008 |
EN 470-1:1995 |
Date expired (30.4.2008) |
CEN |
EN ISO 11612:2008 Protective clothing — Clothing to protect against heat and flame (ISO 11612:2008) |
5.6.2009 |
EN 531:1995 |
Date expired (5.6.2009) |
CEN |
EN 12083:1998 Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking |
4.7.2000 |
|
|
EN 12083:1998/AC:2000 |
|
|
|
|
CEN |
EN ISO 12127-2:2007 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) |
8.3.2008 |
|
|
CEN |
EN 12270:2013 Mountaineering equipment — Chocks — Safety requirements and test methods |
This is the first publication |
EN 12270:1998 |
31.5.2014 |
CEN |
EN 12275:2013 Mountaineering equipment — Connectors — Safety requirements and test methods |
13.12.2013 |
EN 12275:1998 |
Date expired (13.12.2013) |
CEN |
EN 12276:2013 Mountaineering equipment — Frictional anchors — Safety requirements and test methods |
This is the first publication |
EN 12276:1998 |
31.5.2014 |
CEN |
EN 12277:2007 Mountaineering equipment — Harnesses — Safety requirements and test methods |
23.11.2007 |
EN 12277:1998 |
Date expired (23.11.2007) |
CEN |
EN 12278:2007 Montaineering equipment — Pulleys — Safety requirements and test methods |
23.11.2007 |
EN 12278:1998 |
Date expired (30.11.2007) |
CEN |
EN ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear (ISO 12311:2013) |
13.12.2013 |
|
|
CEN |
EN ISO 12312-1:2013 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013) |
13.12.2013 |
EN 1836:2005+A1:2007 |
28.2.2015 |
CEN |
EN ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009) |
6.5.2010 |
EN 1095:1998 |
Date expired (6.5.2010) |
CEN |
EN ISO 12402-2:2006 Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements (ISO 12402-2:2006) |
21.12.2006 |
EN 399:1993 |
Date expired (31.3.2007) |
EN ISO 12402-2:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
||
CEN |
EN ISO 12402-3:2006 Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements (ISO 12402-3:2006) |
21.12.2006 |
EN 396:1993 |
Date expired (31.3.2007) |
EN ISO 12402-3:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
||
CEN |
EN ISO 12402-4:2006 Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements (ISO 12402-4:2006) |
21.12.2006 |
EN 395:1993 |
Date expired (31.3.2007) |
EN ISO 12402-4:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
||
CEN |
EN ISO 12402-5:2006 Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006) |
21.12.2006 |
EN 393:1993 |
Date expired (31.3.2007) |
EN ISO 12402-5:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
||
EN ISO 12402-5:2006/AC:2006 |
|
|
|
|
CEN |
EN ISO 12402-6:2006 Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006) |
21.12.2006 |
|
|
EN ISO 12402-6:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
||
CEN |
EN ISO 12402-8:2006 Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006) |
2.8.2006 |
EN 394:1993 |
Date expired (31.8.2006) |
EN ISO 12402-8:2006/A1:2011 |
11.11.2011 |
Date expired (11.11.2011) |
||
CEN |
EN ISO 12402-9:2006 Personal flotation devices — Part 9: Test methods (ISO 12402-9:2006) |
21.12.2006 |
|
|
EN ISO 12402-9:2006/A1:2011 |
11.11.2011 |
Date expired (11.11.2011) |
||
CEN |
EN ISO 12402-10:2006 Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) |
2.8.2006 |
|
|
CEN |
EN 12477:2001 Protective gloves for welders |
10.8.2002 |
|
|
EN 12477:2001/A1:2005 |
6.10.2005 |
Date expired (31.12.2005) |
||
CEN |
EN 12492:2012 Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods |
20.12.2012 |
EN 12492:2000 |
Date expired (30.4.2013) |
CEN |
EN 12628:1999 Diving accessories — Combined buoyancy and rescue devices — Functional and safety requirements, test methods |
4.7.2000 |
|
|
EN 12628:1999/AC:2000 |
|
|
|
|
CEN |
EN 12841:2006 Personal fall protection equipment — Rope access systems — Rope adjustment devices |
21.12.2006 |
|
|
CEN |
EN 12941:1998 Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking |
4.6.1999 |
EN 146:1991 |
Date expired (4.6.1999) |
EN 12941:1998/A1:2003 |
6.10.2005 |
Date expired (6.10.2005) |
||
EN 12941:1998/A2:2008 |
5.6.2009 |
Date expired (5.6.2009) |
||
CEN |
EN 12942:1998 Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking |
4.6.1999 |
EN 147:1991 |
Date expired (4.6.1999) |
EN 12942:1998/A1:2002 |
28.8.2003 |
Date expired (28.8.2003) |
||
EN 12942:1998/A2:2008 |
5.6.2009 |
Date expired (5.6.2009) |
||
CEN |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
6.5.2010 |
EN 13034:2005 |
Date expired (6.5.2010) |
CEN |
EN 13061:2009 Protective clothing — Shin guards for association football players — Requirements and test methods |
6.5.2010 |
EN 13061:2001 |
Date expired (6.5.2010) |
CEN |
EN 13087-1:2000 Protective helmets — Test methods — Part 1: Conditions and conditioning |
10.8.2002 |
|
|
EN 13087-1:2000/A1:2001 |
10.8.2002 |
Date expired (10.8.2002) |
||
CEN |
EN 13087-2:2012 Protective helmets — Test methods — Part 2: Shock absorption |
20.12.2012 |
EN 13087-2:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-3:2000 Protective helmets — Test methods — Part 3: Resistance to penetration |
10.8.2002 |
|
|
EN 13087-3:2000/A1:2001 |
10.8.2002 |
Date expired (10.8.2002) |
||
CEN |
EN 13087-4:2012 Protective helmets — Test methods — Part 4: Retention system effectiveness |
20.12.2012 |
EN 13087-4:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-5:2012 Protective helmets — Test methods — Part 5: Retention system strength |
20.12.2012 |
EN 13087-5:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-6:2012 Protective helmets — Test methods — Part 6: Field of vision |
20.12.2012 |
EN 13087-6:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-7:2000 Protective helmets — Test methods — Part 7: Flame resistance |
10.8.2002 |
|
|
EN 13087-7:2000/A1:2001 |
10.8.2002 |
Date expired (10.8.2002) |
||
CEN |
EN 13087-8:2000 Protective helmets — Test methods — Part 8: Electrical properties |
21.12.2001 |
|
|
EN 13087-8:2000/A1:2005 |
6.10.2005 |
Date expired (6.10.2005) |
||
CEN |
EN 13087-10:2012 Protective helmets — Test methods — Part 10: Resistance to radiant heat |
20.12.2012 |
EN 13087-10:2000 |
Date expired (30.4.2013) |
CEN |
EN 13089:2011 Mountaineering equipment — Ice-tools — Safety requirements and test methods |
9.7.2011 |
|
|
CEN |
EN 13138-1:2008 Buoyant aids for swimming instruction — Part 1: Safety requirements and test methods for buoyant aids to be worn |
5.6.2009 |
EN 13138-1:2003 |
Date expired (5.6.2009) |
CEN |
EN 13158:2009 Protective clothing — Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers — Requirements and test methods |
6.5.2010 |
EN 13158:2000 |
Date expired (6.5.2010) |
CEN |
EN 13178:2000 Personal eye-protection — Eye protectors for snowmobile users |
21.12.2001 |
|
|
CEN |
EN 13274-1:2001 Respiratory protective devices — Methods of test — Part 1: Determination of inward leakage and total inward leakage |
21.12.2001 |
|
|
CEN |
EN 13274-2:2001 Respiratory protective devices — Methods of test — Part 2: Practical performance tests |
21.12.2001 |
|
|
CEN |
EN 13274-3:2001 Respiratory protective devices — Methods of test — Part 3: Determination of breathing resistance |
10.8.2002 |
|
|
CEN |
EN 13274-4:2001 Respiratory protective devices — Methods of test — Part 4: Flame tests |
10.8.2002 |
|
|
CEN |
EN 13274-5:2001 Respiratory protective devices — Methods of test — Part 5: Climatic conditions |
21.12.2001 |
|
|
CEN |
EN 13274-6:2001 Respiratory protective devices — Methods of test — Part 6: Determination of carbon dioxide content of the inhalation air |
10.8.2002 |
|
|
CEN |
EN 13274-7:2008 Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration |
20.6.2008 |
EN 13274-7:2002 |
Date expired (31.7.2008) |
CEN |
EN 13274-8:2002 Respiratory protective devices — Methods of test — Part 8: Determination of dolomite dust clogging |
28.8.2003 |
|
|
CEN |
EN 13277-1:2000 Protective equipment for martial arts — Part 1: General requirements and test methods |
24.2.2001 |
|
|
CEN |
EN 13277-2:2000 Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
24.2.2001 |
|
|
CEN |
EN 13277-3:2013 Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors |
This is the first publication |
EN 13277-3:2000 |
30.6.2014 |
CEN |
EN 13277-4:2001 Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
10.8.2002 |
|
|
EN 13277-4:2001/A1:2007 |
23.11.2007 |
Date expired (31.12.2007) |
||
CEN |
EN 13277-5:2002 Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
10.8.2002 |
|
|
CEN |
EN 13277-6:2003 Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females |
21.2.2004 |
|
|
CEN |
EN 13277-7:2009 Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors |
6.5.2010 |
|
|
CEN |
EN ISO 13287:2012 Personal protective equipment — Footwear — Test method for slip resistance (ISO 13287:2012) |
13.3.2013 |
EN ISO 13287:2007 |
Date expired (30.4.2013) |
CEN |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
21.12.2001 |
|
|
CEN |
EN 13484:2012 Helmets for users of luges |
20.12.2012 |
EN 13484:2001 |
Date expired (30.4.2013) |
CEN |
EN 13546:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods |
23.11.2007 |
EN 13546:2002 |
Date expired (31.12.2007) |
CEN |
EN 13567:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods |
23.11.2007 |
EN 13567:2002 |
Date expired (31.12.2007) |
CEN |
EN 13594:2002 Protective gloves for professional motorcycle riders — Requirements and test methods |
28.8.2003 |
|
|
CEN |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
28.8.2003 |
|
|
CEN |
EN 13595-2:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 2: Test method for determination of impact abrasion resistance |
28.8.2003 |
|
|
CEN |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
28.8.2003 |
|
|
CEN |
EN 13595-4:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 4: Test method for determination of impact cut resistance |
28.8.2003 |
|
|
CEN |
EN 13634:2010 Protective footwear for motorcycle riders — Requirements and test methods |
9.7.2011 |
EN 13634:2002 |
Date expired (9.7.2011) |
CEN |
EN ISO 13688:2013 Protective clothing — General requirements (ISO 13688:2013) |
13.12.2013 |
EN 340:2003 |
Date expired (31.1.2014) |
CEN |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
20.12.2012 |
EN 13781:2001 |
Date expired (30.4.2013) |
CEN |
EN 13794:2002 Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking |
28.8.2003 |
EN 1061:1996 EN 400:1993 EN 401:1993 |
Date expired (28.8.2003) |
CEN |
EN 13819-1:2002 Hearing protectors — Testing — Part 1: Physical test methods |
28.8.2003 |
|
|
CEN |
EN 13819-2:2002 Hearing protectors — Testing — Part 2: Acoustic test methods |
28.8.2003 |
|
|
CEN |
EN 13832-1:2006 Footwear protecting against chemicals — Part 1: Terminology and test methods |
21.12.2006 |
|
|
CEN |
EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
CEN |
EN 13832-3:2006 Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
CEN |
EN 13911:2004 Protective clothing for firefighters — Requirements and test methods for fire hoods for firefighters |
6.10.2005 |
|
|
CEN |
EN 13921:2007 Personal protective equipment — Ergonomic principles |
23.11.2007 |
|
|
CEN |
EN 13949:2003 Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking |
21.2.2004 |
|
|
CEN |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) |
6.10.2005 |
|
|
EN ISO 13982-1:2004/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
||
CEN |
EN ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
6.10.2005 |
|
|
CEN |
EN ISO 13995:2000 Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
6.10.2005 |
|
|
CEN |
EN ISO 13997:1999 Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
4.7.2000 |
|
|
EN ISO 13997:1999/AC:2000 |
|
|
|
|
CEN |
EN ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
28.8.2003 |
EN 412:1993 |
Date expired (28.8.2003) |
CEN |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14052:2012+A1:2012 High performance industrial helmets |
20.12.2012 |
EN 14052:2012 |
Date expired (30.4.2013) |
CEN |
EN 14058:2004 Protective clothing — Garments for protection against cool environments |
6.10.2005 |
|
|
CEN |
EN ISO 14116:2008 Protective clothing — Protection against heat and flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2008) |
28.1.2009 |
EN 533:1997 |
Date expired (28.1.2009) |
EN ISO 14116:2008/AC:2009 |
|
|
|
|
CEN |
EN 14120:2003+A1:2007 Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods |
23.11.2007 |
EN 14120:2003 |
Date expired (31.12.2007) |
CEN |
EN 14126:2003 Protective clothing — Performance requirements and tests methods for protective clothing against infective agents |
6.10.2005 |
|
|
EN 14126:2003/AC:2004 |
|
|
|
|
CEN |
EN 14143:2013 Respiratory equipment — Self-contained re-breathing diving apparatus |
13.12.2013 |
EN 14143:2003 |
Date expired (31.1.2014) |
CEN |
EN 14225-1:2005 Diving suits — Part 1: Wet suits — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14225-2:2005 Diving suits — Part 2: Dry suits — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14225-3:2005 Diving suits — Part 3: Actively heated or cooled suits (systems) — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14225-4:2005 Diving suits — Part 4: One atmosphere suits (ADS) — Human factors requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14325:2004 Protective clothing against chemicals — Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
6.10.2005 |
|
|
CEN |
EN 14328:2005 Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14360:2004 Protective clothing against rain — Test method for ready made garments — Impact from above with high energy droplets |
6.10.2005 |
|
|
CEN |
EN 14387:2004+A1:2008 Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking |
20.6.2008 |
EN 14387:2004 |
Date expired (31.7.2008) |
CEN |
EN 14404:2004+A1:2010 Personal protective equipment — Knee protectors for work in the kneeling position |
6.5.2010 |
EN 14404:2004 |
Date expired (31.7.2010) |
CEN |
EN 14435:2004 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking |
6.10.2005 |
|
|
CEN |
EN 14458:2004 Personal eye-equipment — Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
6.10.2005 |
|
|
CEN |
EN ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999) |
16.3.2000 |
|
|
EN ISO 14460:1999/A1:2002 |
10.8.2002 |
Date expired (30.9.2002) |
||
EN ISO 14460:1999/AC:1999 |
|
|
|
|
CEN |
EN 14529:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
19.4.2006 |
|
|
CEN |
EN 14593-1:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 |
Date expired (2.12.2005) |
CEN |
EN 14593-2:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 2: Apparatus with a half mask at positive pressure — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 |
Date expired (2.12.2005) |
EN 14593-2:2005/AC:2005 |
|
|
|
|
CEN |
EN 14594:2005 Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 EN 270:1994 EN 271:1995 EN 1835:1999 EN 12419:1999 |
Date expired (2.12.2005) |
EN 14594:2005/AC:2005 |
|
|
|
|
CEN |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
6.5.2010 |
EN 14605:2005 |
Date expired (6.5.2010) |
CEN |
EN 14786:2006 Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test |
21.12.2006 |
|
|
CEN |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
28.8.2003 |
|
|
CEN |
EN ISO 15025:2002 Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000) |
28.8.2003 |
EN 532:1994 |
Date expired (28.8.2003) |
CEN |
EN ISO 15027-1:2012 Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
13.3.2013 |
EN ISO 15027-1:2002 |
Date expired (31.5.2013) |
CEN |
EN ISO 15027-2:2012 Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
13.3.2013 |
EN ISO 15027-2:2002 |
Date expired (31.5.2013) |
CEN |
EN ISO 15027-3:2012 Immersion suits — Part 3: Test methods (ISO 15027-3:2012) |
13.3.2013 |
EN ISO 15027-3:2002 |
Date expired (31.5.2013) |
CEN |
EN 15090:2012 Footwear for firefighters |
20.12.2012 |
EN 15090:2006 |
Date expired (30.4.2013) |
CEN |
EN 15151-1:2012 Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
20.12.2012 |
|
|
CEN |
EN 15333-1:2008 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus |
20.6.2008 |
|
|
EN 15333-1:2008/AC:2009 |
|
|
|
|
CEN |
EN 15333-2:2009 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus |
6.5.2010 |
|
|
CEN |
EN 15613:2008 Knee and elbow protectors for indoor sports — Safety requirements and test methods |
5.6.2009 |
|
|
CEN |
EN 15614:2007 Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland clothing |
23.11.2007 |
|
|
CEN |
EN ISO 15831:2004 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
6.10.2005 |
|
|
CEN |
EN 16027:2011 Protective clothing — Gloves with protective effect for association football goal keepers |
16.2.2012 |
|
|
CEN |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) |
This is the first publication |
EN ISO 17249:2004 |
30.11.2015 |
CEN |
EN ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
28.1.2009 |
EN 463:1994 |
Date expired (28.2.2009) |
CEN |
EN ISO 17491-4:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008) |
28.1.2009 |
EN 468:1994 |
Date expired (28.2.2009) |
CEN |
EN ISO 20344:2011 Personal protective equipment — Test methods for footwear (ISO 20344:2011) |
16.2.2012 |
EN ISO 20344:2004 |
Date expired (30.6.2012) |
CEN |
EN ISO 20345:2011 Personal protective equipment — Safety footwear (ISO 20345:2011) |
16.2.2012 |
EN ISO 20345:2004 |
Date expired (30.6.2013) |
CEN |
EN ISO 20346:2004 Personal protective equipment — Protective footwear (ISO 20346:2004) |
6.10.2005 |
EN 346:1992 EN 346-2:1996 |
Date expired (6.10.2005) |
EN ISO 20346:2004/A1:2007 |
8.3.2008 |
Date expired (31.3.2008) |
||
EN ISO 20346:2004/AC:2007 |
|
|
|
|
CEN |
EN ISO 20347:2012 Personal protective equipment — Occupational footwear (ISO 20347:2012) |
20.12.2012 |
EN ISO 20347:2004 |
Date expired (30.4.2013) |
CEN |
EN ISO 20349:2010 Personal protective equipment — Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding — Requirements and test method (ISO 20349:2010) |
9.7.2011 |
|
|
CEN |
EN ISO 20471:2013 High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
28.6.2013 |
EN 471:2003+A1:2007 |
Date expired (30.9.2013) |
CEN |
EN 24869-1:1992 Acoustics — Hearing protectors — Subjective method for the measurement of sound attenuation (ISO 4869-1:1990) |
16.12.1994 |
|
|
Cenelec |
EN 50286:1999 Electrical insulating protective clothing for low-voltage installations |
16.3.2000 |
|
|
EN 50286:1999/AC:2004 |
|
|
|
|
Cenelec |
EN 50321:1999 Electrically insulating footwear for working on low voltage installations |
16.3.2000 |
|
|
Cenelec |
EN 50365:2002 Electrically insulating helmets for use on low voltage installations |
10.4.2003 |
|
|
Cenelec |
EN 60743:2001 Live working — Terminology for tools, equipment and devices IEC 60743:2001 |
10.4.2003 |
EN 60743:1996 |
Date expired (1.12.2004) |
EN 60743:2001/A1:2008 IEC 60743:2001/A1:2008 |
9.7.2011 |
Date expired (9.7.2011) |
||
Cenelec |
EN 60895:2003 Live working — Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. IEC 60895:2002 (Modified) |
6.10.2005 |
EN 60895:1996 |
Date expired (1.7.2006) |
Cenelec |
EN 60903:2003 Live working — Gloves of insulating material IEC 60903:2002 (Modified) |
6.10.2005 |
EN 50237:1997 + EN 60903:1992 + A11:1997 |
Date expired (1.7.2006) |
Cenelec |
EN 60984:1992 Sleeves of insulating material for live working IEC 60984:1990 (Modified) |
4.6.1999 |
|
|
EN 60984:1992/A11:1997 |
4.6.1999 |
Date expired (4.6.1999) |
||
EN 60984:1992/A1:2002 IEC 60984:1990/A1:2002 |
10.4.2003 |
Date expired (6.10.2005) |
English