- Home
- Machinery Directive
- History of the Machinery Directive 2006/42/EC
- Machinery directive 2006/42/EC
- Whereas of machinery directive 2006/42/EC
- Articles of machinery directive 2006/42/EC
- Article 1 of machinery directive 2006/42/EC - Scope
- Article 2 of machinery directive 2006/42/EC - Definitions
- Article 3 : Specific Directives of machinery directive 2006/42/EC
- Article 4 : Market surveillance of machinery directive 2006/42/EC
- Article 5 : Placing on the market and putting into service - machinery directive 2006/42/EC
- Article 6 : Freedom of movement - machinery directive 2006/42/EC
- Article 7 : Presumption of conformity and harmonised standards - machinery directive 2006/42/EC
- Article 8 : Specific measures - machinery directive 2006/42/EC
- Article 9 : Specific measures to deal with potentially hazardous machinery - machinery directive 2006/42/EC
- Article 10 : Procedure for disputing a harmonised standard - machinery directive 2006/42/EC
- Article 11 : Safeguard clause - machinery directive 2006/42/EC
- Article 12 : Procedures for assessing the conformity of machinery - machinery directive 2006/42/EC
- Article 13 : Procedure for partly completed machinery - 2006/42/EC
- Article 14 : Notified bodies - machinery directive 2006/42/EC
- Article 15 : Installation and use of machinery - machinery directive 2006/42/EC
- Article 16 : CE marking - machinery directive 2006/42/EC
- Article 17 : Non-conformity of marking - machinery directive 2006/42/EC
- Article 18 : Confidentiality - machinery directive 2006/42/EC
- Article 19 : Cooperation between Member States - machinery directive 2006/42/EC
- Article 20 : Legal remedies - machinery directive 2006/42/EC
- Article 21 : Dissemination of information - machinery directive 2006/42/EC
- Article 22 : Committee - machinery directive 2006/42/EC
- Article 23 : Penalties - machinery directive 2006/42/EC
- Article 24 : Amendment of Directive 95/16/EC - machinery directive 2006/42/EC
- Article 25 : Repeal - machinery directive 2006/42/EC
- Article 26 : Transposition - machinery directive 2006/42/EC
- Article 27 : Derogation - machinery directive 2006/42/EC
- Article 28 : Entry into force - machinery directive 2006/42/EC
- Article 29 : Addressees - machinery directive 2006/42/EC
- ANNEX I of machinery directive 2006/42/EC - Summary
- GENERAL PRINCIPLES of annex 1 of machinery directive 2006/42/EC
- 1 ESSENTIAL HEALTH AND SAFETY REQUIREMENTS of annex 1 - definitions - machinery directive 2006/42/EC
- Article 1.1.2. Principles of safety integration of annex 1 machinery directive 2006/42/EC
- Article 1.1.3. Materials and products annex 1 machinery directive 2006/42/EC
- Article 1.1.4. Lighting - annex 1 machinery directive 2006/42/EC
- Article 1.1.5. Design of machinery to facilitate its handling - annex 1 machinery directive 2006/42/EC
- Article 1.1.6. Ergonomics - annex 1 machinery directive 2006/42/EC
- Article 1.1.7. Operating positions - annex 1 machinery directive 2006/42/EC
- Article 1.1.8. Seating - annex 1 machinery directive 2006/42/EC
- Article 1.2.1. Safety and reliability of control systems - annex 1 of machinery directive 2006/42/EC
- Article 1.2.2. Control devices - annex 1 of machinery directive 2006/42/EC
- Article 1.2.3. Starting - annex 1 of machinery directive 2006/42/EC
- Article 1.2.4. Stopping - annex 1 of machinery directive 2006/42/EC
- Article 1.2.4.4. Assembly of machinery - Annex 1 of machinery directive 2006/42/EC
- Article 1.2.5. Selection of control or operating modes - annex 1 of machinery directive 2006/42/EC
- Article 1.2.6. Failure of the power supply - annex 1 of machinery directive 2006/42/EC
- Article 1.3. PROTECTION AGAINST MECHANICAL HAZARDS - annex 1 of machinery directive 2006/42/EC
- Article 1.4. REQUIRED CHARACTERISTICS OF GUARDS AND PROTECTIVE DEVICES - annex 1 of machinery directive 2006/42/EC
- Article 1.5. RISKS DUE TO OTHER HAZARDS - annex 1 of machinery directive 2006/42/EC
- Article 1.6. MAINTENANCE - annex 1 of machinery directive 2006/42/EC
- Article 1.7. INFORMATION - annex 1 of machinery directive 2006/42/EC
- Article 2. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS - annex 1 machinery directive 2006/42/EC
- Article 3. SUPPLEMENTARY ESSENTIAL HEALTH TO THE MOBILITY OF MACHINERY - annex 1 machinery directive 2006/42/EC
- Article 4. SUPPLEMENTARY REQUIREMENTS TO OFFSET HAZARDS DUE TO LIFTING OPERATIONS of machinery directive 2006/42/EC
- Article 5. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR UNDERGROUND WORK of machinery directive 2006/42/EC
- Article 6. SUPPLEMENTARY REQUIREMENTS - HAZARDS DUE TO THE LIFTING OF PERSONS of machinery directive 2006/42/EC
- Annex II : Declarations of CONFORMITY OF THE MACHINERY, DECLARATION OF INCORPORATION - machinery directive 2006/42/EC
- Annex III of machinery directive 2006/42/EC - CE marking
- Annex IV of machinery directive 2006/42/EC
- Annex V of machinery directive 2006/42/EC
- Annex VI of machinery directive 2006/42/EC
- Annex VII - Technical file for machinery - machinery directive 2006/42/EC
- Annex VIII - Assessment of conformity of machinery directive 2006/42/EC
- Annex IX of machinery directive 2006/42/EC - EC type-examination
- Annex X of machinery directive 2006/42/EC - Full quality assurance
- Annex XI of machinery directive 2006/42/EC - Minimum criteria for the notification of bodies
- Annex XII of machinery directive 2006/42/EC - Correlation table between machinery directive 2006/42/CE and MD 1998/37/CE
- Machinery directive 1998/37/EC
- considerings of machinery directive 1998/37/CE
- articles of 1998/37/EC machinery directive
- Annex I of 1998/37/CE machinery directive
- Annex II of 1998/37/EC machinery directive
- Annex III of machinery directive 1998/37/CE
- Annex IV of machine directive 1998/37/EC
- Annex V of machines directive 1998/37/CE
- Annex VI of machines directive 1998/37/EC
- Annex VII of machines directive 1998/37/EC
- Annex VIII of 1998/37/CE machine directive
- Annex IX of machinery directive 1998/37/CE
- Machinery directive 1989/392/EC
- whereas of machinery directive machines 1989/392/EEC
- articles of machinery directive 1989/392/EEC
- Annex I of machinery directive 1989/392/EEC
- Annex II of machine directive 1989/392/EEC
- Annex III of machinery directive 1989/392/EEC
- Annex IV of machinery directive 1989/392/EEC
- Annex V of machinery directive 1989/392/EEC
- Annex VI of machine directive 1989/392/EEC
- Annexe VII of machinery directive 1989/392/EEC
- Amendments of 1989/392/EEC directive
- ATEX directives
- ATEX 94/9/EC directive
- Whereas of ATEX 94/9/CE directive
- Articles of ATEX 94/9/CE directive
- article 1 ATEX 94/9/EC directive
- article 2 ATEX 94/9/EC directive
- article 3 ATEX 94/9/EC directive
- article 4 : ATEX 94/9/EC directive
- article 5 : ATEX 94/9/EC directive
- article 6 : ATEX 94/9/EC directive
- article 7 : ATEX 94/9/EC directive
- article 8 ATEX 94/9/EC directive
- article 9 : ATEX 94/9/EC directive
- article 10 : ATEX 94/9/EC directive
- article 11 : ATEX 94/9/EC directive
- article 12 : ATEX 94/9/EC directive
- article 13 : ATEX 94/9/EC directive
- article 14 : ATEX 94/9/EC directive
- article 15 : ATEX 94/9/EC directive
- article 16 : ATEX 94/9/EC directive
- ANNEX I of ATEX 94/9/EC directive : CRITERIA DETERMINING THE CLASSIFICATION OF EQUIPMENT-GROUPS INTO CATEGORIES
- ANNEX II of ATEX 94/9/EC : directive ESSENTIAL HEALTH AND SAFETY REQUIREMENTS -EHSR
- ANNEX III of ATEX 94/9/EC directive : MODULE EC-TYPE EXAMINATION
- ANNEX IV of ATEX 94/9/EC directive : MODULE PRODUCTION QUALITY ASSURANCE
- ANNEX V of ATEX 94/9/EC directive : MODULE PRODUCT VERIFICATION
- ANNEX VI of ATEX 94/9/EC directive : MODULE CONFORMITY TO TYPE
- ANNEX VII of ATEX 94/9/EC directive : MODULE PRODUCT QUALITY ASSURANCE
- ANNEX VIII of ATEX 94/9/EC directive : MODULE INTERNAL CONTROL OF PRODUCTION
- ANNEX IX of ATEX 94/9/EC directive : MODULE UNIT VERIFICATION
- ANNEX X of ATEX 94/9/EC directive : CE Marking - Content of the EC declaration of conformity
- ANNEX XI of ATEX 94/9/EC directive: NOTIFICATION OF BODIES
- ATEX 99/92/EC Directive
- ATEX DIRECTIVE 2014/34/UE
- whereas of 2014/34/UE ATEX directive
- Articles of ATEX 2014/34/UE directive
- Annex 1 of ATEX 2014/34/UE directive
- Annex 2 of the ATEX 2014/34/UE directive
- Annex 3 of ATEX 2014/34/UE directive
- Annex 4 of ATEX 2014/34/UE directive
- Annex 5 of ATEX 2014/34/UE directive
- Annex 6 of ATEX 2014/34/UE directive
- Annex 7 of ATEX 94/9/EC directive
- Annex 8 of the ATEX 2014/34/UE directive
- Annex 9 of the ATEX 2014/34/UE directive
- Annex 10 of ATEX 2014/34/UE directive
- Annex 11 of ATEX 2014/34/UE directive
- Annex 12 of the ATEX 2014/34/UE directive
- Audits in Ex field - EN 13980, OD 005 and EN ISO/CEI 80079-34
- New ATEX directive
- RASE european project
- ATEX 94/9/EC directive
- IECEX
- Standardization & European Regulation
- Safety of machines : Standardization and European regulations
- European regulation for machines - standardization for machines - harmonized standards
- Standardization in machinery
- EN ISO 12100 - Décembre 2010
- EN ISO 12100-1 - January 2004
- EN ISO 12100-1:2003/A1
- EN ISO 12100-2 November 2003
- EN ISO 12100-2:2003/A1
- EN ISO 14121-1 September 2007
- ISO/TR 14121-2 - 2007
- EN 50205:2002 standard - Relays with forcibly guided (mechanically linked) contacts
- ISO 11161:2007
- ISO 13849-1:2006
- ISO 13849-2:2012
- ISO 13850:2006 - Safety of machinery -- Emergency stop -- Principles for design
- ISO 13851:2002 - Safety of machinery -- Two-hand control devices -- Functional aspects and design principles
- ISO 13854:1996 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
- ISO 13855:2010 - Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body
- ISO 13856-1:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles
- ISO 13856-2:2013 - Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for design testing
- ISO 13856-3:2013 Safety of machinery -- Pressure-sensitive protective devices - Part 3: General principles for design
- ISO 13857:2008 Safety of machinery -- Safety distances to prevent hazard zones
- ISO 14118:2000 - Safety of machinery -- Prevention of unexpected start-up
- ISO 14119:2013- Interlocking devices associated with guards
- ISO 14120:2002 - Guards -- General requirements for the design and construction
- ISO 14122-1:2001 - Permanent means of access to machinery
- ISO 14122-2:2001 - Permanent means of access to machinery
- ISO 14122-4:2004 - Permanent means of access to machinery
- ISO 14123-1:1998 - Reduction of risks to health from hazardous substances emitted by machinery
- ISO 14123-2:1998 - Reduction of risks to health from hazardous substances emitted by machinery
- ISO 14159:2002 - Hygiene requirements for the design of machinery
- ISO 19353:2005 -- Fire prevention and protection
- ISO/AWI 17305 - Safety of machinery - Safety functions of control systems
- ISO/DTR 22100-2 - Safety of machinery -- Part 2: How ISO 12100 relates to ISO 13849-1
- ISO/TR 14121-2:2012 - Risk assessment - Part 2: Practical guidance
- ISO/TR 18569:2004 - Guidelines for the understanding and use of safety of machinery standards
- ISO/TR 23849:2010 - Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems
- STABILITY DATES FOR Machinery STANDARDS
- harmonized standards list - machinery-directive 2006/42/CE
- Publication of harmonised standards for machinery directive 2006/42/EC - 9.3.2018
- Harmonized standard list - machinery directive 2006/42/EC - 9.6.2017
- Harmonized standards for machinery - OJ C 2016/C173/01 of 15/05/2016
- Harmonized standards for machinery -OJ C 2016/C14/102 of 15/01/2016
- Harmonized standards for machinery - corrigendum OJ C 2015/C 087/03 of 13/03/2015
- harmonized standards for machinery - OJ C 2015/C 054/01 of 13/02/2015
- Application guide for machinery directive 2006/42/EC
- Guide to application of the machinery directive 2006/42/CE - July 2017
- Guide to application of the Machinery Directive 2006/42/EC - second edition June 2010
- Guide to application of machinery directive - 1-2 : The citations
- Guide to application of machinery directive - § 3 to § 31 The Recitals
- Guide to application of machinery directive - § 32 to § 156 - The Articles
- Guide to application of machinery directive - § 157 to § 381 - Annex I
- Guide to application of machinery directive - § 382 to § 386 - ANNEX II Declarations
- Guide to application of machinery directive - § 387 - ANNEX III CE marking
- recommendation for use - machinery directive 2006/42/EC
- Notified bodies under the machinery directive 2006/42/CE
- Safety of Ex, ATEX and IECEx equipments : Standardization
- Standardization in Ex Field
- The transposition of the ATEX 94/9/EC Directive to the 2014/34/EU directive
- harmonized standards list - ATEX directive 2014/34/EU
- Harmonized standard list for ATEX 2014/34/UE - 12-10-2018
- Harmonized standard list for ATEX 2014/34/UE - 15.6.2018
- Harmonized standard list for ATEX 2014/34/UE - 12-07-2019
- Harmonized standard list for ATEX 2014/34/UE - 9.6.2017
- Harmonized standards list ATEX 2014/34/UE directive - OJ C 126 - 08/04/2016
- Guide to application of the ATEX Directive 2014/34/EU
- application guide of 2014/34/EU directive - preambule, citations and recitals
- Guide to application of the ATEX 2014/34/UE directive - THE ARTICLES OF THE ATEX DIRECTIVE
- Guide to application of the ATEX 2014/34/UE directive - ANNEX I CLASSIFICATION INTO CATEGORIES
- Guide to application of the ATEX 2014/34/UE directive - ANNEX II ESSENTIAL HEALTH AND SAFETY REQUIREMENTS
- Guide to application of the ATEX 2014/34/UE directive - ANNEX III MODULE B: EU-TYPE EXAMINATION
- Guide to application of the ATEX 2014/34/UE directive - ANNEX IV MODULE D: CONFORMITY TO TYPE
- Guide to application of machinery directive - § 388 - ANNEX IV machinery and mandatory certification
- Guide to application of the ATEX 2014/34/UE directive - ANNEX V MODULE F: CONFORMITY TO TYPE
- Alignment of ten technical harmonisation directives - Decision No 768/2008/EC
- ATEX 94/9/EC directive documents
- ATEX 94/9/EC guidelines
- ATEX 94/9/EC guidelines 4th edition
- 1 INTRODUCTION of ATEX 94/9/EC guidelines 4th edition
- 2 OBJECTIVE OF THE ATEX DIRECTIVE 94/9/EC - ATEX 94/9/EC guidelines 4th edition
- 3 GENERAL CONCEPTS of ATEX 94/9/EC directive ATEX 94/9/EC guidelines 4th edition
- 4 IN WHICH CASES DOES DIRECTIVE 94/9/EC APPLY - ATEX 94/9/EC guidelines 4th edition
- 5 EQUIPMENT NOT IN THE SCOPE OF DIRECTIVE 94/9/EC - ATEX 94/9/EC guidelines 4th edition
- 6 APPLICATION OF DIRECTIVE 94/9/EC ALONGSIDE OTHERS THAT MAY APPLY - ATEX 94/9/EC guidelines 4th edition
- 7 USED, REPAIRED OR MODIFIED PRODUCTS AND SPARE PARTS - ATEX 94/9/EC guidelines 4th edition
- 8 CONFORMITY ASSESSMENT PROCEDURES - ATEX 94/9/EC guidelines 4th edition
- 9 NOTIFIED BODIES - ATEX 94/9/EC guidelines 4th edition
- 10 DOCUMENTS OF CONFORMITY - ATEX 94/9/EC guidelines 4th edition
- 11 MARKING - CE marking -ATEX 94/9/EC guidelines 4th edition
- 12 SAFEGUARD CLAUSE AND PROCEDURE - ATEX 94/9/EC guidelines 4th edition
- 13 EUROPEAN HARMONISED STANDARDS - ATEX 94/9/EC guidelines 4th edition
- 14 USEFUL WEBSITES - ATEX 94/9/EC guidelines 4th edition
- ANNEX I: SPECIFIC MARKING OF EXPLOSION PROTECTION - ATEX 94/9/EC guidelines 4th edition
- ANNEX II: BORDERLINE LIST - ATEX PRODUCTS - ATEX 94/9/EC guidelines 4th edition
- ATEX 94/9/EC guidelines 4th edition
- Harmonized standards list - ATEX 94/9/EC directive
- Harmonized standards list ATEX 94/9/EC directive - OJ C 126 - 08/04/2016
- Harmonized standards list ATEX 94/9/EC - OJ C 335 - 09/10/2015
- Harmonized standards list ATEX 94/9/EC - OJ-C 445-02 - 12/12/2014
- Harmonized standards list ATEX 94/9/EC - OJ-C 076-14/03/2014
- Harmonized standards list ATEX 94/9/EC - OJ-C 319 05/11/2013
- ATEX 94/9/EC guidelines
- European regulation for ATEX 94/9/EC ATEX directive
- Guide to application of ATEX 2014/34/EU directive second edition
- Safety of machines : Standardization and European regulations
- Latest news & Newsletters
- Functional safety
- Terms and definitions for functional safety
- Safety devices in ATEX
- The SAFEC project
- main report of the SAFEC project
- Appendix 1 of the SAFEC project - guidelines for functional safety
- Appendix 2 of the SAFEC project
- ANNEX A - SAFEC project - DERIVATION OF TARGET FAILURE MEASURES
- ANNEX B - SAFEC project - ASSESSMENT OF CURRENT CONTROL SYSTEM STANDARDS
- ANNEX C - safec project - IDENTIFICATION OF “USED SAFETY DEVICES”
- Annex D - SAFEC project - study of ‘ Used Safety Devices’
- Annex E - Determination of a methodology for testing, validation and certification
- EN 50495 standard for safety devices
- The SAFEC project
- Safety components in Machinery
- STSARCES - Standards for Safety Related Complex Electronic Systems
- STSARCES project - final report
- STSARCES - Annex 1 : Software engineering tasks - Case tools
- STSARCES - Annex 2 : tools for Software - fault avoidance
- STSARCES - Annex 3 : Guide to evaluating software quality and safety requirements
- STSARCES - Annex 4 : Guide for the construction of software tests
- STSARCES - Annex 5 : Common mode faults in safety systems
- STSARCES - Annex 6 : Quantitative Analysis of Complex Electronic Systems using Fault Tree Analysis and Markov Modelling
- STSARCES - Annex 7 : Methods for fault detection
- STSARCES - Annex 8 : Safety Validation of Complex Components - Validation by Analysis
- STSARCES - Annex 9 : safety Validation of complex component
- STSARCES - Annex 10 : Safety Validation of Complex Components - Validation Tests
- STSARCES - Annex 11 : Applicability of IEC 61508 - EN 954
- STSARCES - Annex 12 : Task 2 : Machine Validation Exercise
- STSARCES - Annex 13 : Task 3 : Design Process Analysis
- STSARCES - Annex 14 : ASIC development and validation in safety components
- Functional safety in machinery - EN 13849-1 - Safety-related parts of control systems
- STSARCES - Standards for Safety Related Complex Electronic Systems
- History of standards for functional safety in machinery
- Basic safety principles - Well-tried safety principles - well tried components
- Functional safety - detection error codes - CRC and Hamming codes
- Functional safety - error codes detection - parity and chechsum
- Functional safety and safety fieldbus
- ISO 13849-1 and SISTEMA
- Prevention of unexpected start-up and machinery directive
- Self tests for micro-controllers
- Validation by analysis of complex safety systems
- basic safety principles - safety relays for machinery
- Download center
- New machinery regulation
- Revision of machinery directive 2006/42/EC
- security for machines
Harmonized standard list for ATEX 2014/34/UE - 12-07-2019
Since 1 December 2018 the references of harmonised standards are published in, and withdrawn from the Official Journal of the European Union by means of 'Commission implementing decisions'.
The decision : "COMMISSION IMPLEMENTING DECISION (EU) 2019/1202 of 12 July 2019 on the harmonised standards for equipment and protective systems intended for use in potentially explosive atmospheres drafted in support of Directive 2014/34/EU of the European Parliament and of the Council" is available on the link of the text
The references published under Directive 2014/34/EU on equipment for explosive atmospheres are found in the Commission communication published in OJ C 371 of 12 October 2018 and in the Commission Implementing Decision (EU) 2019/1202 of 12 July 2019 (OJ L 189, 15 July 2019) listed below. They need to be read together, taking into account that the decision modifies some references published in the Communication. The summary list below gives a consolidated overview on all publications in the Official Journal.
This decision is linked with the following list :produce from the official file on Europa web site : https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/equipment-explosive-atmosphere_en
|
Legislation reference |
ESO |
Reference number of the standard |
Title of the standard |
Date of start of presumption of conformity |
OJ reference for publication in OJ |
Restriction |
Date of start of presumption of conformity with restriction |
OJ reference for publication of a restriction in OJ |
Date of withdrawal from OJ (end of presumption of conformity) |
OJ reference for withdrawal from OJ |
|
2014/34/EU |
CEN |
EN 1010-1:2004+A1:2010 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1010-2:2006+A1:2010 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1127-1:2011 |
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1127-2:2014 |
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1710:2005+A1:2008 |
Equipment and components intended for use in potentially explosive atmospheres in underground mines |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
30/06/2017 |
OJ C 371, 12-10-2018 |
|
2014/34/EU |
CEN |
EN 1755:2015 |
Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1834-1:2000 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1834-2:2000 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1834-3:2000 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1839:2012 |
Determination of explosion limits of gases and vapours |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
11/01/2018 |
OJ C 183, 09-06-2017 |
|
2014/34/EU |
CEN |
EN 1839:2017 |
Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours |
09/06/2017 |
OJ C 183, 09-06-2017 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 1953:2013 |
Atomising and spraying equipment for coating materials - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 12581:2005+A1:2010 |
Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 12621:2006+A1:2010 |
Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 12757-1:2005+A1:2010 |
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13012:2012 |
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13160-1:2003 |
Leak detection systems - Part 1: General principles |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
12/10/2018 |
OJ C 371, 12-10-2018 |
|
2014/34/EU |
CEN |
EN 13237:2012 |
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13463-1:2009 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
31/10/2019 |
OJ C 293, 12-08-2016 |
|
2014/34/EU |
CEN |
EN 13463-2:2004 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
12/10/2018 |
OJ C 371, 12-10-2018 |
|
2014/34/EU |
CEN |
EN 13463-3:2005 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
12/10/2018 |
OJ C 371, 12-10-2018 |
|
2014/34/EU |
CEN |
EN 13463-5:2011 |
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
31/10/2019 |
OJ C 293, 12-08-2016 |
|
2014/34/EU |
CEN |
EN 13463-6:2005 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
31/10/2019 |
OJ C 293, 12-08-2016 |
|
2014/34/EU |
CEN |
EN 13463-8:2003 |
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
31/10/2019 |
OJ C 293, 12-08-2016 |
|
2014/34/EU |
CEN |
EN 13616:2004 |
Overfill prevention devices for static tanks for liquid petroleum fuels |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
11/07/2017 |
OJ C 293, 12-08-2016 |
|
2014/34/EU |
CEN |
EN 13616-1:2016 |
Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
12/08/2016 |
OJ C 293, 12-08-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13617-1:2012 |
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13617-2:2012 |
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13617-3:2012 |
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13617-4:2012 |
Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13760:2003 |
Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 13821:2002 |
Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
30/09/2018 |
OJ C 092, 09-03-2018 |
|
2014/34/EU |
CEN |
EN 13852-1:2013 |
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14034-1:2004+A1:2011 |
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14034-2:2006+A1:2011 |
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14034-3:2006+A1:2011 |
Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14034-4:2004+A1:2011 |
Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14373:2005 |
Explosion suppression systems |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14460:2006 |
Explosion resistant equipment |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
21/07/2018 |
OJ C 209, 15-06-2018 |
|
2014/34/EU |
CEN |
EN 14460:2018 |
Explosion resistant equipment |
15/06/2018 |
OJ C 209, 15-06-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14491:2012 |
Dust explosion venting protective systems |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14492-1:2006+A1:2009 |
Cranes - Power driven winches and hoists - Part 1: Power driven winches |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14492-2:2006+A1:2009 |
Cranes - Power driven winches and hoists - Part 2: Power driven hoists |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14522:2005 |
Determination of the auto ignition temperature of gases and vapours |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14591-1:2004 |
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14591-2:2007 |
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14591-4:2007 |
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14677:2008 |
Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14678-1:2013 |
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14681:2006+A1:2010 |
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14756:2006 |
Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
11/01/2018 |
OJ C 183, 09-06-2017 |
|
2014/34/EU |
CEN |
EN 14797:2006 |
Explosion venting devices |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14973:2015 |
Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14983:2007 |
Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14986:2007 |
Design of fans working in potentially explosive atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
31/01/2020 |
OJ C 183, 09-06-2017 |
|
2014/34/EU |
CEN |
EN 14986:2017 |
Design of fans working in potentially explosive atmospheres |
09/06/2017 |
OJ C 183, 09-06-2017 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 14994:2007 |
Gas explosion venting protective systems |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15089:2009 |
Explosion isolation systems |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15188:2007 |
Determination of the spontaneous ignition behaviour of dust accumulations |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15198:2007 |
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15233:2007 |
Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15268:2008 |
Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15794:2009 |
Determination of explosion points of flammable liquids |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 15967:2011 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 16009:2011 |
Flameless explosion venting devices |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 16020:2011 |
Explosion diverters |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 16447:2014 |
Explosion isolation flap valves |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN ISO 16852:2010 |
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2008, including Cor 1:2008 and Cor 2:2009) |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
30/11/2017 |
OJ C 183, 09-06-2017 |
|
2014/34/EU |
CEN |
EN ISO 16852:2016 |
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) |
09/06/2017 |
OJ C 183, 09-06-2017 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN 17077:2018 |
Determination of burning behaviour of dust layers |
12/10/2018 |
OJ C 371, 12-10-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN ISO/IEC 80079-20-2:2016, |
Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016) |
09/03/2018 |
OJ C 092, 09-03-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN ISO 80079-36:2016 |
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
12/08/2016 |
OJ C 293, 12-08-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN ISO 80079-37:2016 |
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016) |
12/08/2016 |
OJ C 293, 12-08-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
CEN |
EN ISO/IEC 80079-38:2016, |
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
12/10/2018 |
OJ C 371, 12-10-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50050:2006 |
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
14/10/2016 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 50050-1:2013 |
Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50050-2:2013 |
Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50050-3:2013 |
Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50104:2010 |
Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50176:2009 |
Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50177:2009, |
Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50223:2010 |
Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
13/04/2018 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 50223:2015 |
Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50271:2010 |
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
15/06/2021 |
OJ C 371, 12-10-2018 |
|
2014/34/EU |
Cenelec |
EN 50271:2018 |
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
12/10/2018 |
OJ C 371, 12-10-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50281-2-1:1998 |
Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50303:2000 |
Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50381:2004 |
Transportable ventilated rooms with or without an internal source of release |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 50495:2010 |
Safety devices required for the safe functioning of equipment with respect to explosion risks |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-0:2012, |
Explosive atmospheres - Part 0: Equipment - General requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
06/07/2021 |
OJ L 189, 15-07-2019 |
|
2014/34/EU |
Cenelec |
EN IEC 60079-0:2018 |
Explosive atmospheres - Part 0: Equipment - General requirements |
15/07/2019 |
OJ L 189, 15-07-2019 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-1:2007 |
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
01/08/2017 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-1:2014 |
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-2:2007 |
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
25/08/2017 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-2:2014 |
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-5:2007 |
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
24/03/2018 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-5:2015 |
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-6:2007 |
Explosive atmospheres - Part 6: Equipment protection by oil immersion "o" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
27/03/2018 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-6:2015 |
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-7:2007 |
Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
31/07/2018 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-7:2015 |
Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
19/01/2021 |
OJ C 209, 15-06-2018 |
|
2014/34/EU |
Cenelec |
EN 60079-7:2015, |
Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
15/06/2018 |
OJ C 209, 15-06-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-11:2012 |
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-15:2010 |
Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-18:2009 |
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
16/01/2018 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-18:2015 |
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
28/09/2020 |
OJ C 092, 09-03-2018 |
|
2014/34/EU |
Cenelec |
EN 60079-18:2015, |
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
09/03/2018 |
OJ C 092, 09-03-2018 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-20-1:2010 |
Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-25:2010 |
Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-26:2007 |
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
01/12/2017 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-26:2015 |
Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-27:2008 |
Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
12/08/2016 |
OJ C 293, 12-08-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-28:2007 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
01/07/2018 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-28:2015 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-29-1:2007 |
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
23/12/2019 |
OJ C 183, 09-06-2017 |
|
2014/34/EU |
Cenelec |
EN 60079-29-1:2016 |
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
09/06/2017 |
OJ C 183, 09-06-2017 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-29-4:2010 |
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-30-1:2007 |
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
06/03/2020 |
OJ C 298, 08-09-2017 |
|
2014/34/EU |
Cenelec |
EN 60079-30-1:2017 |
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
08/09/2017 |
OJ C 298, 08-09-2017 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-31:2009 |
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
01/01/2017 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN 60079-31:2014 |
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 60079-35-1:2011 |
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
|
2014/34/EU |
Cenelec |
EN 61241-4:2006 |
Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
25/08/2017 |
OJ C 126, 08-04-2016 |
|
2014/34/EU |
Cenelec |
EN ISO/IEC 80079-34:2011 |
Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
20/04/2016 |
OJ C 126, 08-04-2016 |
- |
- |
- |
- |
- |
English
