Annex IV of machinery directive 1989/392/EEC

ANNEX IV : TYPES OF MACHINES FOR WHICH THE PROCEDURE REFERRED TO IN ARTICLE 8 (2) (b) AND (c) MUST BE APPLIED

1 Circular saws (single- or multi-blade) for working with wood and meat.

1.1 Sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed.

1.2 Sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage.

1.3 Sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading.

1.4 Sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading.

2. Hand-fed surface planing machines for woodworking.

3. Thicknessers for one-side dressing with manual loading and/or unloading for woodworking.

4. Band-saws with a mobile bed or carriage and manual loading and/or unloading for working with wood and meat.

5. Combined machines of the types referred to in 1 to 4 and 7 for woodworking

6. Hand-fed tenoning machines with several tool holders for woodworking.

7. Hand-fed vertical spindle moulding machines.

8. Portable chain saws for woodworking.

9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.

10. Injection or compression plastics-moulding machines with manual loading or unloading.

11. Injection or compression rubber-moulding machines with manual loading or unloading.

12. Cartridge-operated fixing guns.