- Home
- Machinery Directive
- History of the Machinery Directive 2006/42/EC
- Machinery directive 2006/42/EC
- Whereas of machinery directive 2006/42/EC
- Articles of machinery directive 2006/42/EC
- Article 1 of machinery directive 2006/42/EC - Scope
- Article 2 of machinery directive 2006/42/EC - Definitions
- Article 3 : Specific Directives of machinery directive 2006/42/EC
- Article 4 : Market surveillance of machinery directive 2006/42/EC
- Article 5 : Placing on the market and putting into service - machinery directive 2006/42/EC
- Article 6 : Freedom of movement - machinery directive 2006/42/EC
- Article 7 : Presumption of conformity and harmonised standards - machinery directive 2006/42/EC
- Article 8 : Specific measures - machinery directive 2006/42/EC
- Article 9 : Specific measures to deal with potentially hazardous machinery - machinery directive 2006/42/EC
- Article 10 : Procedure for disputing a harmonised standard - machinery directive 2006/42/EC
- Article 11 : Safeguard clause - machinery directive 2006/42/EC
- Article 12 : Procedures for assessing the conformity of machinery - machinery directive 2006/42/EC
- Article 13 : Procedure for partly completed machinery - 2006/42/EC
- Article 14 : Notified bodies - machinery directive 2006/42/EC
- Article 15 : Installation and use of machinery - machinery directive 2006/42/EC
- Article 16 : CE marking - machinery directive 2006/42/EC
- Article 17 : Non-conformity of marking - machinery directive 2006/42/EC
- Article 18 : Confidentiality - machinery directive 2006/42/EC
- Article 19 : Cooperation between Member States - machinery directive 2006/42/EC
- Article 20 : Legal remedies - machinery directive 2006/42/EC
- Article 21 : Dissemination of information - machinery directive 2006/42/EC
- Article 22 : Committee - machinery directive 2006/42/EC
- Article 23 : Penalties - machinery directive 2006/42/EC
- Article 24 : Amendment of Directive 95/16/EC - machinery directive 2006/42/EC
- Article 25 : Repeal - machinery directive 2006/42/EC
- Article 26 : Transposition - machinery directive 2006/42/EC
- Article 27 : Derogation - machinery directive 2006/42/EC
- Article 28 : Entry into force - machinery directive 2006/42/EC
- Article 29 : Addressees - machinery directive 2006/42/EC
- ANNEX I of machinery directive 2006/42/EC - Summary
- GENERAL PRINCIPLES of annex 1 of machinery directive 2006/42/EC
- 1 ESSENTIAL HEALTH AND SAFETY REQUIREMENTS of annex 1 - definitions - machinery directive 2006/42/EC
- Article 1.1.2. Principles of safety integration of annex 1 machinery directive 2006/42/EC
- Article 1.1.3. Materials and products annex 1 machinery directive 2006/42/EC
- Article 1.1.4. Lighting - annex 1 machinery directive 2006/42/EC
- Article 1.1.5. Design of machinery to facilitate its handling - annex 1 machinery directive 2006/42/EC
- Article 1.1.6. Ergonomics - annex 1 machinery directive 2006/42/EC
- Article 1.1.7. Operating positions - annex 1 machinery directive 2006/42/EC
- Article 1.1.8. Seating - annex 1 machinery directive 2006/42/EC
- Article 1.2.1. Safety and reliability of control systems - annex 1 of machinery directive 2006/42/EC
- Article 1.2.2. Control devices - annex 1 of machinery directive 2006/42/EC
- Article 1.2.3. Starting - annex 1 of machinery directive 2006/42/EC
- Article 1.2.4. Stopping - annex 1 of machinery directive 2006/42/EC
- Article 1.2.4.4. Assembly of machinery - Annex 1 of machinery directive 2006/42/EC
- Article 1.2.5. Selection of control or operating modes - annex 1 of machinery directive 2006/42/EC
- Article 1.2.6. Failure of the power supply - annex 1 of machinery directive 2006/42/EC
- Article 1.3. PROTECTION AGAINST MECHANICAL HAZARDS - annex 1 of machinery directive 2006/42/EC
- Article 1.4. REQUIRED CHARACTERISTICS OF GUARDS AND PROTECTIVE DEVICES - annex 1 of machinery directive 2006/42/EC
- Article 1.5. RISKS DUE TO OTHER HAZARDS - annex 1 of machinery directive 2006/42/EC
- Article 1.6. MAINTENANCE - annex 1 of machinery directive 2006/42/EC
- Article 1.7. INFORMATION - annex 1 of machinery directive 2006/42/EC
- Article 2. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS - annex 1 machinery directive 2006/42/EC
- Article 3. SUPPLEMENTARY ESSENTIAL HEALTH TO THE MOBILITY OF MACHINERY - annex 1 machinery directive 2006/42/EC
- Article 4. SUPPLEMENTARY REQUIREMENTS TO OFFSET HAZARDS DUE TO LIFTING OPERATIONS of machinery directive 2006/42/EC
- Article 5. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR UNDERGROUND WORK of machinery directive 2006/42/EC
- Article 6. SUPPLEMENTARY REQUIREMENTS - HAZARDS DUE TO THE LIFTING OF PERSONS of machinery directive 2006/42/EC
- Annex II : Declarations of CONFORMITY OF THE MACHINERY, DECLARATION OF INCORPORATION - machinery directive 2006/42/EC
- Annex III of machinery directive 2006/42/EC - CE marking
- Annex IV of machinery directive 2006/42/EC
- Annex V of machinery directive 2006/42/EC
- Annex VI of machinery directive 2006/42/EC
- Annex VII - Technical file for machinery - machinery directive 2006/42/EC
- Annex VIII - Assessment of conformity of machinery directive 2006/42/EC
- Annex IX of machinery directive 2006/42/EC - EC type-examination
- Annex X of machinery directive 2006/42/EC - Full quality assurance
- Annex XI of machinery directive 2006/42/EC - Minimum criteria for the notification of bodies
- Annex XII of machinery directive 2006/42/EC - Correlation table between machinery directive 2006/42/CE and MD 1998/37/CE
- Machinery directive 1998/37/EC
- considerings of machinery directive 1998/37/CE
- articles of 1998/37/EC machinery directive
- Annex I of 1998/37/CE machinery directive
- Annex II of 1998/37/EC machinery directive
- Annex III of machinery directive 1998/37/CE
- Annex IV of machine directive 1998/37/EC
- Annex V of machines directive 1998/37/CE
- Annex VI of machines directive 1998/37/EC
- Annex VII of machines directive 1998/37/EC
- Annex VIII of 1998/37/CE machine directive
- Annex IX of machinery directive 1998/37/CE
- Machinery directive 1989/392/EC
- whereas of machinery directive machines 1989/392/EEC
- articles of machinery directive 1989/392/EEC
- Annex I of machinery directive 1989/392/EEC
- Annex II of machine directive 1989/392/EEC
- Annex III of machinery directive 1989/392/EEC
- Annex IV of machinery directive 1989/392/EEC
- Annex V of machinery directive 1989/392/EEC
- Annex VI of machine directive 1989/392/EEC
- Annexe VII of machinery directive 1989/392/EEC
- Amendments of 1989/392/EEC directive
- ATEX directives
- ATEX 94/9/EC directive
- Whereas of ATEX 94/9/CE directive
- Articles of ATEX 94/9/CE directive
- article 1 ATEX 94/9/EC directive
- article 2 ATEX 94/9/EC directive
- article 3 ATEX 94/9/EC directive
- article 4 : ATEX 94/9/EC directive
- article 5 : ATEX 94/9/EC directive
- article 6 : ATEX 94/9/EC directive
- article 7 : ATEX 94/9/EC directive
- article 8 ATEX 94/9/EC directive
- article 9 : ATEX 94/9/EC directive
- article 10 : ATEX 94/9/EC directive
- article 11 : ATEX 94/9/EC directive
- article 12 : ATEX 94/9/EC directive
- article 13 : ATEX 94/9/EC directive
- article 14 : ATEX 94/9/EC directive
- article 15 : ATEX 94/9/EC directive
- article 16 : ATEX 94/9/EC directive
- ANNEX I of ATEX 94/9/EC directive : CRITERIA DETERMINING THE CLASSIFICATION OF EQUIPMENT-GROUPS INTO CATEGORIES
- ANNEX II of ATEX 94/9/EC : directive ESSENTIAL HEALTH AND SAFETY REQUIREMENTS -EHSR
- ANNEX III of ATEX 94/9/EC directive : MODULE EC-TYPE EXAMINATION
- ANNEX IV of ATEX 94/9/EC directive : MODULE PRODUCTION QUALITY ASSURANCE
- ANNEX V of ATEX 94/9/EC directive : MODULE PRODUCT VERIFICATION
- ANNEX VI of ATEX 94/9/EC directive : MODULE CONFORMITY TO TYPE
- ANNEX VII of ATEX 94/9/EC directive : MODULE PRODUCT QUALITY ASSURANCE
- ANNEX VIII of ATEX 94/9/EC directive : MODULE INTERNAL CONTROL OF PRODUCTION
- ANNEX IX of ATEX 94/9/EC directive : MODULE UNIT VERIFICATION
- ANNEX X of ATEX 94/9/EC directive : CE Marking - Content of the EC declaration of conformity
- ANNEX XI of ATEX 94/9/EC directive: NOTIFICATION OF BODIES
- ATEX 99/92/EC Directive
- ATEX DIRECTIVE 2014/34/UE
- whereas of 2014/34/UE ATEX directive
- Articles of ATEX 2014/34/UE directive
- Annex 1 of ATEX 2014/34/UE directive
- Annex 2 of the ATEX 2014/34/UE directive
- Annex 3 of ATEX 2014/34/UE directive
- Annex 4 of ATEX 2014/34/UE directive
- Annex 5 of ATEX 2014/34/UE directive
- Annex 6 of ATEX 2014/34/UE directive
- Annex 7 of ATEX 94/9/EC directive
- Annex 8 of the ATEX 2014/34/UE directive
- Annex 9 of the ATEX 2014/34/UE directive
- Annex 10 of ATEX 2014/34/UE directive
- Annex 11 of ATEX 2014/34/UE directive
- Annex 12 of the ATEX 2014/34/UE directive
- Audits in Ex field - EN 13980, OD 005 and EN ISO/CEI 80079-34
- New ATEX directive
- RASE european project
- ATEX 94/9/EC directive
- IECEX
- Standardization & European Regulation
- Safety of machines : Standardization and European regulations
- European regulation for machines - standardization for machines - harmonized standards
- Standardization in machinery
- EN ISO 12100 - Décembre 2010
- EN ISO 12100-1 - January 2004
- EN ISO 12100-1:2003/A1
- EN ISO 12100-2 November 2003
- EN ISO 12100-2:2003/A1
- EN ISO 14121-1 September 2007
- ISO/TR 14121-2 - 2007
- EN 50205:2002 standard - Relays with forcibly guided (mechanically linked) contacts
- ISO 11161:2007
- ISO 13849-1:2006
- ISO 13849-2:2012
- ISO 13850:2006 - Safety of machinery -- Emergency stop -- Principles for design
- ISO 13851:2002 - Safety of machinery -- Two-hand control devices -- Functional aspects and design principles
- ISO 13854:1996 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
- ISO 13855:2010 - Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body
- ISO 13856-1:2013 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles
- ISO 13856-2:2013 - Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for design testing
- ISO 13856-3:2013 Safety of machinery -- Pressure-sensitive protective devices - Part 3: General principles for design
- ISO 13857:2008 Safety of machinery -- Safety distances to prevent hazard zones
- ISO 14118:2000 - Safety of machinery -- Prevention of unexpected start-up
- ISO 14119:2013- Interlocking devices associated with guards
- ISO 14120:2002 - Guards -- General requirements for the design and construction
- ISO 14122-1:2001 - Permanent means of access to machinery
- ISO 14122-2:2001 - Permanent means of access to machinery
- ISO 14122-4:2004 - Permanent means of access to machinery
- ISO 14123-1:1998 - Reduction of risks to health from hazardous substances emitted by machinery
- ISO 14123-2:1998 - Reduction of risks to health from hazardous substances emitted by machinery
- ISO 14159:2002 - Hygiene requirements for the design of machinery
- ISO 19353:2005 -- Fire prevention and protection
- ISO/AWI 17305 - Safety of machinery - Safety functions of control systems
- ISO/DTR 22100-2 - Safety of machinery -- Part 2: How ISO 12100 relates to ISO 13849-1
- ISO/TR 14121-2:2012 - Risk assessment - Part 2: Practical guidance
- ISO/TR 18569:2004 - Guidelines for the understanding and use of safety of machinery standards
- ISO/TR 23849:2010 - Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems
- STABILITY DATES FOR Machinery STANDARDS
- harmonized standards list - machinery-directive 2006/42/CE
- Publication of harmonised standards for machinery directive 2006/42/EC - 9.3.2018
- Harmonized standard list - machinery directive 2006/42/EC - 9.6.2017
- Harmonized standards for machinery - OJ C 2016/C173/01 of 15/05/2016
- Harmonized standards for machinery -OJ C 2016/C14/102 of 15/01/2016
- Harmonized standards for machinery - corrigendum OJ C 2015/C 087/03 of 13/03/2015
- harmonized standards for machinery - OJ C 2015/C 054/01 of 13/02/2015
- Application guide for machinery directive 2006/42/EC
- Guide to application of the machinery directive 2006/42/CE - July 2017
- Guide to application of the Machinery Directive 2006/42/EC - second edition June 2010
- Guide to application of machinery directive - 1-2 : The citations
- Guide to application of machinery directive - § 3 to § 31 The Recitals
- Guide to application of machinery directive - § 32 to § 156 - The Articles
- Guide to application of machinery directive - § 157 to § 381 - Annex I
- Guide to application of machinery directive - § 382 to § 386 - ANNEX II Declarations
- Guide to application of machinery directive - § 387 - ANNEX III CE marking
- recommendation for use - machinery directive 2006/42/EC
- Notified bodies under the machinery directive 2006/42/CE
- Safety of Ex, ATEX and IECEx equipments : Standardization
- Standardization in Ex Field
- The transposition of the ATEX 94/9/EC Directive to the 2014/34/EU directive
- harmonized standards list - ATEX directive 2014/34/EU
- Harmonized standard list for ATEX 2014/34/UE - 12-10-2018
- Harmonized standard list for ATEX 2014/34/UE - 15.6.2018
- Harmonized standard list for ATEX 2014/34/UE - 12-07-2019
- Harmonized standard list for ATEX 2014/34/UE - 9.6.2017
- Harmonized standards list ATEX 2014/34/UE directive - OJ C 126 - 08/04/2016
- Guide to application of the ATEX Directive 2014/34/EU
- application guide of 2014/34/EU directive - preambule, citations and recitals
- Guide to application of the ATEX 2014/34/UE directive - THE ARTICLES OF THE ATEX DIRECTIVE
- Guide to application of the ATEX 2014/34/UE directive - ANNEX I CLASSIFICATION INTO CATEGORIES
- Guide to application of the ATEX 2014/34/UE directive - ANNEX II ESSENTIAL HEALTH AND SAFETY REQUIREMENTS
- Guide to application of the ATEX 2014/34/UE directive - ANNEX III MODULE B: EU-TYPE EXAMINATION
- Guide to application of the ATEX 2014/34/UE directive - ANNEX IV MODULE D: CONFORMITY TO TYPE
- Guide to application of machinery directive - § 388 - ANNEX IV machinery and mandatory certification
- Guide to application of the ATEX 2014/34/UE directive - ANNEX V MODULE F: CONFORMITY TO TYPE
- Alignment of ten technical harmonisation directives - Decision No 768/2008/EC
- ATEX 94/9/EC directive documents
- ATEX 94/9/EC guidelines
- ATEX 94/9/EC guidelines 4th edition
- 1 INTRODUCTION of ATEX 94/9/EC guidelines 4th edition
- 2 OBJECTIVE OF THE ATEX DIRECTIVE 94/9/EC - ATEX 94/9/EC guidelines 4th edition
- 3 GENERAL CONCEPTS of ATEX 94/9/EC directive ATEX 94/9/EC guidelines 4th edition
- 4 IN WHICH CASES DOES DIRECTIVE 94/9/EC APPLY - ATEX 94/9/EC guidelines 4th edition
- 5 EQUIPMENT NOT IN THE SCOPE OF DIRECTIVE 94/9/EC - ATEX 94/9/EC guidelines 4th edition
- 6 APPLICATION OF DIRECTIVE 94/9/EC ALONGSIDE OTHERS THAT MAY APPLY - ATEX 94/9/EC guidelines 4th edition
- 7 USED, REPAIRED OR MODIFIED PRODUCTS AND SPARE PARTS - ATEX 94/9/EC guidelines 4th edition
- 8 CONFORMITY ASSESSMENT PROCEDURES - ATEX 94/9/EC guidelines 4th edition
- 9 NOTIFIED BODIES - ATEX 94/9/EC guidelines 4th edition
- 10 DOCUMENTS OF CONFORMITY - ATEX 94/9/EC guidelines 4th edition
- 11 MARKING - CE marking -ATEX 94/9/EC guidelines 4th edition
- 12 SAFEGUARD CLAUSE AND PROCEDURE - ATEX 94/9/EC guidelines 4th edition
- 13 EUROPEAN HARMONISED STANDARDS - ATEX 94/9/EC guidelines 4th edition
- 14 USEFUL WEBSITES - ATEX 94/9/EC guidelines 4th edition
- ANNEX I: SPECIFIC MARKING OF EXPLOSION PROTECTION - ATEX 94/9/EC guidelines 4th edition
- ANNEX II: BORDERLINE LIST - ATEX PRODUCTS - ATEX 94/9/EC guidelines 4th edition
- ATEX 94/9/EC guidelines 4th edition
- Harmonized standards list - ATEX 94/9/EC directive
- Harmonized standards list ATEX 94/9/EC directive - OJ C 126 - 08/04/2016
- Harmonized standards list ATEX 94/9/EC - OJ C 335 - 09/10/2015
- Harmonized standards list ATEX 94/9/EC - OJ-C 445-02 - 12/12/2014
- Harmonized standards list ATEX 94/9/EC - OJ-C 076-14/03/2014
- Harmonized standards list ATEX 94/9/EC - OJ-C 319 05/11/2013
- ATEX 94/9/EC guidelines
- European regulation for ATEX 94/9/EC ATEX directive
- Guide to application of ATEX 2014/34/EU directive second edition
- Safety of machines : Standardization and European regulations
- Latest news & Newsletters
- Functional safety
- Terms and definitions for functional safety
- Safety devices in ATEX
- The SAFEC project
- main report of the SAFEC project
- Appendix 1 of the SAFEC project - guidelines for functional safety
- Appendix 2 of the SAFEC project
- ANNEX A - SAFEC project - DERIVATION OF TARGET FAILURE MEASURES
- ANNEX B - SAFEC project - ASSESSMENT OF CURRENT CONTROL SYSTEM STANDARDS
- ANNEX C - safec project - IDENTIFICATION OF “USED SAFETY DEVICES”
- Annex D - SAFEC project - study of ‘ Used Safety Devices’
- Annex E - Determination of a methodology for testing, validation and certification
- EN 50495 standard for safety devices
- The SAFEC project
- Safety components in Machinery
- STSARCES - Standards for Safety Related Complex Electronic Systems
- STSARCES project - final report
- STSARCES - Annex 1 : Software engineering tasks - Case tools
- STSARCES - Annex 2 : tools for Software - fault avoidance
- STSARCES - Annex 3 : Guide to evaluating software quality and safety requirements
- STSARCES - Annex 4 : Guide for the construction of software tests
- STSARCES - Annex 5 : Common mode faults in safety systems
- STSARCES - Annex 6 : Quantitative Analysis of Complex Electronic Systems using Fault Tree Analysis and Markov Modelling
- STSARCES - Annex 7 : Methods for fault detection
- STSARCES - Annex 8 : Safety Validation of Complex Components - Validation by Analysis
- STSARCES - Annex 9 : safety Validation of complex component
- STSARCES - Annex 10 : Safety Validation of Complex Components - Validation Tests
- STSARCES - Annex 11 : Applicability of IEC 61508 - EN 954
- STSARCES - Annex 12 : Task 2 : Machine Validation Exercise
- STSARCES - Annex 13 : Task 3 : Design Process Analysis
- STSARCES - Annex 14 : ASIC development and validation in safety components
- Functional safety in machinery - EN 13849-1 - Safety-related parts of control systems
- STSARCES - Standards for Safety Related Complex Electronic Systems
- History of standards for functional safety in machinery
- Basic safety principles - Well-tried safety principles - well tried components
- Functional safety - detection error codes - CRC and Hamming codes
- Functional safety - error codes detection - parity and chechsum
- Functional safety and safety fieldbus
- ISO 13849-1 and SISTEMA
- Prevention of unexpected start-up and machinery directive
- Self tests for micro-controllers
- Validation by analysis of complex safety systems
- basic safety principles - safety relays for machinery
- Download center
- New machinery regulation
- Revision of machinery directive 2006/42/EC
- security for machines
Harmonized standard list for ATEX 2014/34/UE - 12-10-2018
|
12.10.2018 |
EN |
Official Journal of the European Union |
C 371/1 |
Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 371/01)
|
ESO |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard |
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements |
8.4.2016 |
|
|
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery |
8.4.2016 |
|
|
|
CEN |
EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology |
8.4.2016 |
|
|
|
CEN |
EN 1127-2:2014 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining |
8.4.2016 |
|
|
|
CEN |
EN 1755:2015 Industrial Trucks — Safety requirements and verification — Supplementary requirements for operation in potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 1834-1:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 1: Group II engines for use in flammable gas and vapour atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 1834-2:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
8.4.2016 |
|
|
|
CEN |
EN 1834-3:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 3: Group II engines for use in flammable dust atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours |
9.6.2017 |
EN 1839:2012 EN 14756:2006 Note 2.1 |
11.1.2018 |
|
CEN |
EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing |
8.4.2016 |
|
|
|
CEN |
EN 13012:2012 Petrol filling stations — Construction and performance of automatic nozzles for use on fuel dispensers |
8.4.2016 |
|
|
|
CEN |
EN 13237:2012 Potentially explosive atmospheres — Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels — Part 1: Overfill prevention devices with closure device |
12.8.2016 |
EN 13616:2004 Note 2.1 |
11.7.2017 |
|
CEN |
EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
8.4.2016 |
|
|
|
CEN |
EN 13617-2:2012 Petrol filling stations — Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
8.4.2016 |
|
|
|
CEN |
EN 13617-3:2012 Petrol filling stations — Part 3: Safety requirements for construction and performance of shear valves |
8.4.2016 |
|
|
|
CEN |
EN 13617-4:2012 Petrol filling stations — Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
8.4.2016 |
|
|
|
CEN |
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles — Nozzle, test requirements and dimensions |
8.4.2016 |
|
|
|
CEN |
EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes |
8.4.2016 |
|
|
|
CEN |
EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds — Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds — Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds — Part 3: Determination of the lower explosion limit LEL of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds — Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14373:2005 Explosion suppression systems |
8.4.2016 |
|
|
|
CEN |
EN 14460:2018 Explosion resistant equipment |
15.6.2018 |
EN 14460:2006 Note 2.1 |
31.7.2018 |
|
CEN |
EN 14491:2012 Dust explosion venting protective systems |
8.4.2016 |
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches |
8.4.2016 |
|
|
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
8.9.2017 |
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists |
8.4.2016 |
|
|
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
8.9.2017 |
|
|
|
CEN |
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours |
8.4.2016 |
|
|
|
CEN |
EN 14591-1:2004 Explosion prevention and protection in underground mines — Protective systems — Part 1: 2-bar explosion proof ventilation structure |
8.4.2016 |
|
|
|
|
EN 14591-1:2004/AC:2006 |
8.4.2016 |
|
|
|
CEN |
EN 14591-2:2007 Explosion prevention and protection in underground mines — Protective systems — Part 2: Passive water trough barriers |
8.4.2016 |
|
|
|
|
EN 14591-2:2007/AC:2008 |
8.4.2016 |
|
|
|
CEN |
EN 14591-4:2007 Explosion prevention and protection in underground mines — Protective systems — Part 4: Automatic extinguishing systems for road headers |
8.4.2016 |
|
|
|
|
EN 14591-4:2007/AC:2008 |
8.4.2016 |
|
|
|
CEN |
EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel |
8.4.2016 |
|
|
|
CEN |
EN 14678-1:2013 LPG equipment and accessories — Construction and performance of LPG equipment for automotive filling stations — Part 1: Dispensers |
8.4.2016 |
|
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
8.4.2016 |
|
|
|
CEN |
EN 14797:2006 Explosion venting devices |
8.4.2016 |
|
|
|
CEN |
EN 14973:2015 Conveyor belts for use in underground installations — Electrical and flammability safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 14983:2007 Explosion prevention and protection in underground mines — Equipment and protective systems for firedamp drainage |
8.4.2016 |
|
|
|
CEN |
EN 14986:2017 Design of fans working in potentially explosive atmospheres |
9.6.2017 |
EN 14986:2007 Note 2.1 |
31.1.2020 |
|
CEN |
EN 14994:2007 Gas explosion venting protective systems |
8.4.2016 |
|
|
|
CEN |
EN 15089:2009 Explosion isolation systems |
8.4.2016 |
|
|
|
CEN |
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations |
8.4.2016 |
|
|
|
CEN |
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies |
8.4.2016 |
|
|
|
CEN |
EN 15794:2009 Determination of explosion points of flammable liquids |
8.4.2016 |
|
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
8.4.2016 |
|
|
|
CEN |
EN 16009:2011 Flameless explosion venting devices |
8.4.2016 |
|
|
|
CEN |
EN 16020:2011 Explosion diverters |
8.4.2016 |
|
|
|
CEN |
EN 16447:2014 Explosion isolation flap valves |
8.4.2016 |
|
|
|
CEN |
EN ISO 16852:2016 Flame arresters — Performance requirements, test methods and limits for use (ISO 16852:2016) |
9.6.2017 |
EN ISO 16852:2010 Note 2.1 |
30.11.2017 |
|
CEN |
EN 17077:2018 Determination of burning behaviour of dust layers |
This is the first publication |
|
|
|
CEN |
EN ISO/IEC 80079-20-2:2016 Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods (ISO/IEC 80079-20-2:2016) |
9.3.2018 |
EN 13821:2002 Note 2.1 |
30.9.2018 |
|
|
EN ISO/IEC 80079-20-2:2016/AC:2017 |
9.3.2018 |
|
|
|
CEN |
EN ISO 80079-36:2016 Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements (ISO 80079-36:2016) |
12.8.2016 |
EN 13463-1:2009 Note 2.1 |
31.10.2019 |
|
CEN |
EN ISO 80079-37:2016 Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety ‘c’, control of ignition sources ‘b’, liquid immersion ‘k’ (ISO 80079-37:2016) |
12.8.2016 |
EN 13463-5:2011 EN 13463-6:2005 EN 13463-8:2003 Note 2.1 |
31.10.2019 |
|
CEN |
EN ISO/IEC 80079-38:2016 Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
This is the first publication |
EN 1710:2005+A1:2008 Note 2.1 |
30.6.2017 |
|
|
EN ISO/IEC 80079-38:2016/A1:2018 |
This is the first publication |
Note 3 |
30.11.2018 |
|
Cenelec |
EN 50050-1:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
8.4.2016 |
EN 50050:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 50050-2:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 2: Hand-held spraying equipment for ignitable coating powder |
8.4.2016 |
EN 50050:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 50050-3:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 3: Hand-held spraying equipment for ignitable flock |
8.4.2016 |
EN 50050:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen — Performance requirements and test methods |
8.4.2016 |
|
|
|
Cenelec |
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material — Safety requirements |
8.4.2016 |
|
|
|
Cenelec |
EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders — Safety requirements |
8.4.2016 |
|
|
|
|
EN 50177:2009/A1:2012 |
8.4.2016 |
Note 3 |
|
|
Cenelec |
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material — Safety requirements |
8.4.2016 |
EN 50223:2010 Note 2.1 |
13.4.2018 |
|
Cenelec |
EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen — Requirements and tests for apparatus using software and/or digital technologies |
This is the first publication |
EN 50271:2010 Note 2.1 |
15.6.2021 |
|
Cenelec |
EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust — Part 2-1: Test methods — Methods for determining the minimum ignition temperatures of dust |
8.4.2016 |
|
|
|
|
EN 50281-2-1:1998/AC:1999 |
8.4.2016 |
|
|
|
Cenelec |
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
8.4.2016 |
|
|
|
Cenelec |
EN 50381:2004 Transportable ventilated rooms with or without an internal source of release |
8.4.2016 |
|
|
|
|
EN 50381:2004/AC:2005 |
8.4.2016 |
|
|
|
Cenelec |
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-0:2012 Explosive atmospheres — Part 0: Equipment — General requirements IEC 60079-0:2011 (Modified) + IS1:2013 |
8.4.2016 |
|
|
|
|
EN 60079-0:2012/A11:2013 |
8.4.2016 |
Note 3 |
7.10.2016 |
|
Cenelec |
EN 60079-1:2014 Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures ‘d’ IEC 60079-1:2014 |
8.4.2016 |
EN 60079-1:2007 Note 2.1 |
1.8.2017 |
|
Cenelec |
EN 60079-2:2014 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosure ‘p’ IEC 60079-2:2014 |
8.4.2016 |
EN 60079-2:2007 EN 61241-4:2006 Note 2.1 |
25.8.2017 |
|
|
EN 60079-2:2014/AC:2015 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-5:2015 Explosive atmospheres — Part 5: Equipment protection by powder filling ‘q’ IEC 60079-5:2015 |
8.4.2016 |
EN 60079-5:2007 Note 2.1 |
24.3.2018 |
|
Cenelec |
EN 60079-6:2015 Explosive atmospheres — Part 6: Equipment protection by liquid immersion ‘o’ IEC 60079-6:2015 |
8.4.2016 |
EN 60079-6:2007 Note 2.1 |
27.3.2018 |
|
Cenelec |
EN 60079-7:2015 Explosive atmospheres — Part 7: Equipment protection by increased safety ‘e’ IEC 60079-7:2015 |
8.4.2016 |
EN 60079-7:2007 Note 2.1 |
31.7.2018 |
|
|
EN IEC 60079-7:2015/A1:2018 IEC 60079-7:2015/A1:2017 |
15.6.2018 |
Note 3 |
19.1.2021 |
|
Cenelec |
EN 60079-11:2012 Explosive atmospheres — Part 11: Equipment protection by intrinsic safety ‘i’ IEC 600 IEC 60079-11:2011 |
8.4.2016 |
EN 60079-27:2008 Note 2.1 |
|
|
Cenelec |
EN 60079-15:2010 Explosive atmospheres — Part 15: Equipment protection by type of protection ‘n’ IEC 60079-15:2010 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-18:2015 Explosive atmospheres — Part 18: Equipment protection by encapsulation ‘m’ IEC 60079-18:2014 |
8.4.2016 |
EN 60079-18:2009 Note 2.1 |
16.1.2018 |
|
|
EN 60079-18:2015/A1:2017 IEC 60079-18:2014/A1:2017 |
9.3.2018 |
Note 3 |
28.9.2020 |
|
Cenelec |
EN 60079-20-1:2010 Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data IEC 60079 IEC 60079-20-1:2010 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-25:2010 Explosive atmospheres — Part 25: Intrinsically safe electrical systems IEC 60079-25:2010 |
8.4.2016 |
|
|
|
|
EN 60079-25:2010/AC:2013 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-26:2015 Explosive atmospheres — Part 26: Equipment with Equipment Protection Level (EPL) Ga IEC 60079-26:2014 |
8.4.2016 |
EN 60079-26:2007 Note 2.1 |
2.12.2017 |
|
Cenelec |
EN 60079-28:2015 Explosive atmospheres — Part 28: Protection of equipment and transmission systems using optical radiation IEC 60079-28:2015 |
8.4.2016 |
|
1.7.2018 |
|
Cenelec |
EN 60079-29-1:2016 Explosive atmospheres — Part 29-1: Gas detectors — Performance requirements of detectors for flammable gases IEC 60079-29-1:2016 (Modified) |
9.6.2017 |
EN 60079-29-1:2007 Note 2.1 |
23.12.2019 |
|
Cenelec |
EN 60079-29-4:2010 Explosive atmospheres — Part 29-4: Gas detectors — Performance requirements of open path detectors for flammable gases IEC 60079-29-4:2009 (Modified) |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-30-1:2017 Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements IEC/IEEE 60079-30-1:2015 (Modified) |
8.9.2017 |
EN 60079-30-1:2007 Note 2.1 |
6.3.2020 |
|
Cenelec |
EN 60079-31:2014 Explosive atmospheres — Part 31: Equipment dust ignition protection by enclosure ‘t’ IEC 60079-31:2013 |
8.4.2016 |
EN 60079-31:2009 Note 2.1 |
1.1.2017 |
|
Cenelec |
EN 60079-35-1:2011 Explosive atmospheres — Part 35-1: Caplights for use in mines susceptible to firedamp — General requirements — Construction and testing in relation to the risk of explosion IEC 60079-35-1:2011 |
8.4.2016 |
|
|
|
|
EN 60079-35-1:2011/AC:2011 |
8.4.2016 |
|
|
|
Cenelec |
EN ISO/IEC 80079-34:2011 Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
8.4.2016 |
|
|
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|||
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-s... |
(1) ESO: European standardisation organisation:
|
— |
CEN: Rue de la Science 23, B-1040 Brussels, Tel. +32 25500811; Fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Rue de la Science 23, B-1040 Brussels, Tel. +32 25500811; Fax +32 25500819 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492944200; Fax +33 493654716, (http://www.etsi.eu) |
https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:52018XC1012(02)&from=FR
English
