New standards in machinery sector from TC 44

Submitted by root on Thu, 08/25/2016 - 14:39

New standards in machinery sector - standardization in safety of machinery.from TC 44

The European regulation TEXTS are identified in RED Color

August 2016

  • information on IEC 63074 Ed1 - Security aspects related to functional safety of safety-related contril systems. The proposal has been approved and a WG 15 has been created. This working group is managed by Patrick Gehlen and a first meeting is planed for September.

  • information on  IEC 60204-11 "Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV". Comments have been integrated.The CD and coments will be discussed during the meeting planed for September 2016

  • information on  positive vote report 44/765/FDIS - IEC 60204-1 Ed. 6.0: Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  • information on IEC 61496-3 Ed3: Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR). The CD and comments will be discussed during a meeting planned in September 2016

  • The agenda of the annual meeting of TC 44 has been published. The meeting will take place in Frankfurt 14/October 2016

  • The list of STABILITY DATES FOR STANDARDS that will be REVIEW AT THE MEETING OF IEC/ TC 44. To be held as part of IEC 80th General Meeting, Frankfurt, Germany: Steigenberger Hotel Room 6 on Friday 14th October 2016 (2016/10/14) has been published.

July 2016

  • information of results for positive results for vote of IEC 62745 Ed. 1.0 : Safety of machinery - Requirements for the interfacing of cableless controllers to machinery. The FDIS will be issue in july 2016.

January 2016

  • Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) - OJ C 014 of 15/01/2016 

December 2015

  • information on IEC 61496-3, Sécurité des machines – Equipements de protection électro-sensibles – Partie 3: Exigences particulières pour les équipements utilisant des dispositifs protecteurs optoélectroniques actifs sensibles aux réflexions diffuses (AOPDDR). 

  • consultation on IEC 60445 ed6 « Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors »

November 2015

  • IEC/ TC 44 Questionnaire regarding the transfer of the work of IEC/ TC 44 JGW14 to IEC/ TC 44 WG7 and continuation of the work.

October 2015

September 2015

  • Documents DTR/DTS (Draft Technical Report / Draft Technical Specification) : IEC/TS 60204-34: Safety of machinery-Electrical equipment of machines - Part 34 requirements for machine tools Sécurité des machines –Équipement électrique des machines – Partie 34：Exigences pour les machines-outil

August 2015

  • Comments on Documents CD (Committee Draft) : : ISO/IEC 17305 Ed1: Safety of machinery - Design of safety functions realized by control systems

  • Information : REVIEW OF STRATEGIC BUSINESS PLAN (SBP)

  • Information : RESULT OF 44/720/DC - PROPOSAL TO START THE MAINTENANCE OF IEC 60204-11: 2000 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1 000 V A.C. OR 1 500 V D.C. AND NOT EXCEEDING 36 KV

  • Information : ADVISORY COMMITTEE ON APPLICATIONS OF ROBOTIC TECHNOLOGY

  • Comment : IEC/TS 60204-34: Safety of machinery-Electrical equipment of machines - Part 34 requirements for machine tools

  • Call for experts for  Joint Working Group JWG 18 of SC 121B with TC 44 in charge of analyzing existing gaps and overlaps between :

    • IEC 61439-2 « Ensembles d'appareillage à basse tension - Partie 2 : ensembles d'appareillage de puissance » and
    • IEC 60204-1 « Sécurité des machines - Équipement électrique des machines - Partie 1 : règles générales », 

  • Information : IEC 61439-8 Ed.1: Low-voltage switchgear and controlgear assemblies - Part 8: Assemblies for machinery (cabinets, boards or panels)

  • Information : REVIEW OF STRATEGIC BUSINESS PLAN (SBP)

  • Information : RESULT OF 44/720/DC - PROPOSAL TO START THE MAINTENANCE OF IEC 60204-11: 2000 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1 000 V A.C. OR 1 500 V D.C. AND NOT EXCEEDING 36 KV

  • Information : ADVISORY COMMITTEE ON APPLICATIONS OF ROBOTIC TECHNOLOGY

​June 2015

  • Publication for consultation of IEC/TS 60204-34: Safety of machinery-Electrical equipment of machines - Part 34 - requirements for machine tools ( DTR/DTS (Draft Technical Report / Draft Technical Specification)

  • Information : Next meeting of TC 44 to be held in La Plaine Saint-Denis, France from 16 to 18 September 2015 and publication of the DRAFT AGENDA 

May 2015

  • Compilation of comments on 44/719/CD - IEC/TS 60204-34: Safety of machinery-Electrical equipment of machines - Part 34 : requirements for machine tools

  • Results of 44/121/Q - Questionnaire regarding the future activity of sc121b wg9 on low-voltage switchgear and controlgear assemblies for machinery

  • IEC 62745: Safety of machinery - General requirements for cableless control systems of machinery - document for CDV

  • Compilation of comments on 44/706/CD - IEC 62745 Ed 1:Safety of machinery - General requirements for cableless control systems of machinery

April 2015

  • Result of voting on 44/721/NP - Safety of machinery - Electro-sensitive protective equipment - Safety-related sensors used for protection of person

  • RESULT OF 44/724/Q - APPROVAL OF TC 44 REPRESENTATIVE ON THE ADVISORY COMMITTEE ON INFORMATION SECURITY AND DATA PRIVACY (ACSEC)

  • New document for information - Commentaires établis par la Commission UF 44 sur le questionnaire 44/726/Q : « Regarding the future activity of SC121B WG9 on Low-voltage switchgear and controlgear assemblies for machinery »

March 2015

  • New document - Result of voting on 44/718/CDV - IEC 62061 Amd 2: Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems

  • New document - Questionnaire regarding the future activity of SC121B WG9 on Low-voltage switchgear and controlgear assemblies for machinery

  • Harmonized standards for machinery - corrigendum OJ C 2015/C 087/03 of 13/03/2015

February 2015

  • New document from IEC Fiche descriptive du Groupe de Travail Retour d'Expérience dans le cadre de la Commission de Normalisation AFNOR/UF 56 "Sureté de Fonctionnement"

  • New document for "consultation" related to - Result of voting on IEC 60204-1 Ed 6: Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  • New harmonized standards list for machinery - OJ C 2015/C 054/01 of 13/02/2015

January 2015

December 2014

​September 2014

  • New document for "consultation" related to IEC 62061 Amd 2: Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems

  • New document for "consultation" related to IEC 60204-34 TS: Safety of machinery-Electrical equipment of machines – Part 34: Requirements for machine tools  

  • New document for "consultation" related to Proposal to start the maintenance of IEC 60204-11: 2000 Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V A.C. or 1 500 V D.C. and not exceeding 36 KV

     

July 2014

  • New harmonized standards list for machinery - OJ C 220 of 11/07/2014
  • New document for "information" related to Review report on IEC 62061: Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems
  • New document for "consultation" related to IEC 60204-1 Ed 6:Safety of machinery - Electrical equipment of machines - Part 1: General requirements
  • New document for "information" related to the compilation of comments on 44/706/CD - IEC 62745 Ed 1:Safety of machinery - General requirements for cableless control systems of machinery

June 2014

  • New document for "information" related to ISO/IEC 17305 future standard - Design of safety functions Realized by control systems

May 2014

  • EN 13980 is no longer an harmonized standard for audits managed in the scope of ATEX 94/9/EC directive since 25 May 2014. The manufacturers must now learn EN ISO/IEC 80079-34:2011

April 2014

  • New document for "information" reference - Compilation of comments on 44/692/CD - IEC/TS 61496-4-3 Ed.1.Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - additional requirements when using stereo techniques (VBPDST)
  • New document for "consutation" reference IEC/TS 61496-4-3 Ed.1. Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST)
  • New publication of the list of harmonized standards for machinery directive 2006/42/EC -OJ C 110 of 11/04/2014
  • Publication of Design of safety related controls/control systems for machinery in relation with the future standard ISO/AWI 17305 - Safety of machinery - Safety functions of control systems.
  • New document for "information" reference  IEC/TS 61496-4-3 Ed.1. Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST)
  • Compilation of comments on  IEC 62745 Ed 1: Safety of machinery - General requirements for cableless control systems of machinery
  • RESULT for IEC/TR XXXXX ESTIMATION OF SIL OR PL FOR MUTING SYSTEMS IN ESPE APPLICATIONS
  • New document for "consultation" reference IEC 62745 Ed 1: Safety of machinery - General requirements for cableless control systems of machinery

March 2014

  • New document for "information" reference Proposal from the German National Committee - Safety of Machinery - Electro-sensitive protective equipment - Safety-related sensors used for protection of person
  • New document for "consultation" reference Draft For Comment: Safety Of Machinery - Design Of Safety Functions Realized By Control Systems

January 2014

  • New document for "consultation" reference IEC/TR XXXXX ESTIMATION OF SIL OR PL FOR MUTING SYSTEMS IN ESPE APPLICATIONS
  • Next meeting of TC 44 to be held in Clearwater Beach, Florida from 29th to 30th April 2014.

December 2013

November 2013

October 2013

  • New document for "consultation" reference CLC/BTWG 143-1 Alignement de la Directive Basse Tension sous le nouveau cadre législatif.
  • Demande de nouveau projet en vue de la publication d’un guide basé sur le guide IEC 116 actuel « Guidelines for safety related risk assessment and risk reduction for low voltage equipment »

September 2013

  • New document circulating reference IEC/TS 61496-4-2 Ed.1.: Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - additional requirements when using reference pattern techniques

August 2013

  • New document circulating ​​reference 44/692/CD 2013-11-08 to 2014-01-10 - in relation with the CD edition of a new standard IEC/TS 61496-4-3 Ed.1.Safety of machinery – Electro-sensitive protective equipment – Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - additional requirement when using stereo techniques (VBPDST)

June 2013

April 2013

March 2013

  • REPORT OF VOTING ON AN FDIS For IEC 60204-31: Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

February 2013

January 2013

New standards and documents.

  • New standard in project for : IEC/TS 60204-34: Safety of machinery-Electrical equipment of machines - Part 34：requirements for machine tools
  •  IEC 60204-31: Safety of machinery – Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

November 2012

  • New standard in project for : IEC 60204-1 Ed 6: Safety of machinery - Electrical equipment of machines - Part 1: General requirements
English
  • Share this
  • Français