- Index
- Bienvenue sur le site WEB "industry-finder".
- Résolution du Conseil, du 7 mai 1985, concernant une nouvelle approche
- Nouveau guide bleu pour la mise en oeuvre des directives européennes pour les produits règles 2016
- l'éco-conception et les produits industriels
- le marquage CE des machines
- Le nouveau guide bleu daté de avril 2014
- Directive Machines
- Historique de la directive machines 2006/42/CE
- Directive machines 2006/42/CE
- Considerants de la directive machines 2006/42/CE
- Articles de la directive machines 2006/42/CE
- Article 1 de la directive machine 2006/42/CE - Champ d'application
- Article 2 de la directive machine 2006/42/CE - Definitions
- Article 3 de la directive machine 2006/42/CE - Directives particulières
- Article 4 de la directive machine 2006/42/CE - Surveillance du marché
- Article 5 de la directive machine 2006/42/CE - Mise sur le marché et mise en service
- Article 6 de la directive machine 2006/42/CE - Libre circulation
- Article 7 de la directive machine 2006/42/CE - Présomption de conformité et normes harmonisées
- Article 8 de la directive machine 2006/42/CE - Mesures spécifiques
- Article 9 de la directive machine 2006/42/CE - Mesures particulières visant des machines potentiellement dangereuses
- Article 10 de la directive machine 2006/42/CE - Procédure de contestation d'une norme harmonisée
- Article 11 de la directive machine 2006/42/CE - Clause de sauvegarde
- Article 12 : Procédures d'évaluation de la conformité des machines - directive machines 2006/42/CE
- Article 13 de la directive machine 2006/42/CE - Procédure pour les quasi-machines
- Article 14 de la directive machine 2006/42/CE - Organismes notifiés
- Article 15 de la directive machine 2006/42/CE - Installation et utilisation des machines
- Article 16 de la directive machine 2006/42/CE - Marquage CE
- Article 17 de la directive machine 2006/42/CE - Marquage non conforme
- Article 18 de la directive machine 2006/42/CE - Confidentialité
- Article 19 de la directive machine 2006/42/CE - Coopération entre les États membres
- Article 20 de la directive machine 2006/42/CE - Voies de recours
- Article 21 de la directive machine 2006/42/CE - Diffusion de l'information
- Article 22 de la directive machine 2006/42/CE - Comité
- Article 23 de la directive machine 2006/42/CE - Sanctions
- Article 24 de la directive machine 2006/42/CE - Modification de la directive 95/16/CE
- Article 25 : Abrogation de la directive machines 2006/42/CE
- Article 26 : Transposition - directive machines 2006/42/CE
- Article 27 : Dérogation - directive machines 2006/42/CE
- Article 28 : Entrée en vigueur - directive machine 2006/42/CE
- Article 29 : Destinataires - directive machine 2006/42/CE
- ANNEXE I de la directive machines - sommaire
- principes généraux - annexe 1 directive machines 2006/42/CE
- 1 EXIGENCES ESSENTIELLES DE SANTE ET DE SECURITE - definitions - Annexe I de la directive machines 2006/42/CE
- Article 1.1.2. Principes d'intégration de la sécurité - Annexe I de la directive machines 2006/42/CE
- Article 1.1.3. Matériaux et produits - Annexe I de la directive machines 2006/42/CE
- Article 1.1.4. Éclairage - Annexe I de la directive machines 2006/42/CE
- Article 1.1.5. Conception de la machine en vue de sa manutention - Annexe I de la directive machines 2006/42/CE
- Article 1.1.6. Ergonomie - Annexe I de la directive machines 2006/42/CE
- Article 1.1.7. Poste de travail - Annexe I de la directive machines 2006/42/CE
- Article 1.1.8. Siège - Annexe I de la directive machines 2006/42/CE
- Article 1.2.1. Sécurité et fiabilité des systèmes de commande - annexe 1 de la directive machines 2006/42/CE
- Article 1.2.2. Organes de service - Annexe I de la directive machines 2006/42/CE
- Article 1.2.2. Organes de service - Annexe I de la directive machines 2006/42/CE
- Article 1.2.3. Mise en marche - Annexe I de la directive machines 2006/42/CE
- Articles 1.2.4. Arrêt, arrêt normal, arrêt d'urgence - Annexe I de la directive machines 2006/42/CE
- Article 1.2.4.4. Ensembles de machines - Annexe I de la directive machines 2006/42/CE
- Article 1.2.5. Sélection des modes de commande ou de fonctionnement - Annexe I de la directive machines 2006/42/CE
- Article 1.2.6. Défaillance de l'alimentation en énergie - Annexe I de la directive machines 2006/42/CE
- Article 1.3. MESURES DE PROTECTION CONTRE LES RISQUES MÉCANIQUES - Annexe I de la directive machines 2006/42/CE
- Article 1.4. CARACTÉRISTIQUES - PROTECTEURS ET DISPOSITIFS DE PROTECTION - Annexe I de la directive machines 2006/42/CE
- Article 1.5. RISQUES DUS À D'AUTRES DANGERS - Annexe I de la directive machines 2006/42/CE
- Article 1.6. ENTRETIEN - Annexe I de la directive machines 2006/42/CE
- Article 1.7. INFORMATION - Annexe I de la directive machines 2006/42/CE
- Article 2. EXIGENCES COMPLÉMENTAIRES POUR CERTAINES CATÉGORIES DE MACHINES - Annexe I de la directive machines 2006/42/CE
- Article 3. EXIGENCES POUR PALLIER LES DANGERS DUS À LA MOBILITÉ DES MACHINES - Annexe I de la directive machines 2006/42/CE
- Article 4. EXIGENCES COMPLÉMENTAIRES - DANGERS DUS AUX OPÉRATIONS DE LEVAGE - Annexe I directive machines 2006/42/CE
- Article 5. EXIGENCES COMPLÉMENTAIRES MACHINES DESTINÉES À DES TRAVAUX SOUTERRAINS - Annexe I de la directive machines 2006/42/CE
- Article 6. EXIGENCES COMPLÉMENTAIRES DANGERS DUS AU LEVAGE DE PERSONNES - Annexe I de la directive machines 2006/42/CE
- Annexe II de la directive machines 2006/42/CE - déclaration CE de conformité
- Annexe III de la directive machines 2006/42/CE - marquage CE
- Annexe IV de la directive machines 2006/42/CE
- Annexe V de la directive machines 2006/42/CE - Liste des composants de sécurité
- Annexe VI de la directive machines 2006/42/CE - Notice d'assemblage d'une quasi-machine
- Annexe VII de la directive machines 2006/42/CE - Dossier technique pour les machines et les quasi-machines
- Annexe VIII directive machines 2006/42/CE - Évaluation de la conformité avec contrôle interne de fabrication d'une machine
- Annexe IX de la directive machines 2006/42/CE - Examen CE de type
- Annexe X de la directive machines 2006/42/CE - Assurance qualité complète
- Annexe XI directive machines 2006/42/CE - Critères minimaux pour la notification des organismes notifiés
- Annexe XII directive machines 2006/42/CE - Tableau de correspondance entre directive machines 2006/42/CE et directive 1998/37/CE
- Directive machines 98/37/CE
- considérants de la directive machines 1998/37/CE
- articles de la directive machines 1998/37/CE
- Annexe I de la directive machines 1998/37/CE
- Annexe II de la directive machines 1998/37/CE
- Annexe III de la directive machines 1998/37/CE
- Annexe IV de la directive machines 1998/37/CE
- Annexe V de la directive machines 1998/37/CE
- Annexe VI de la directive machines 1998/37/CE
- Annexe VII de la directive machines 1998/37/CE
- Annexe VIII de la directive machines 1998/37/CE
- Annexe IX de la directive machines 1998/37/CE
- Directive machines 1989/392/CE
- Considérants de la directive machines 1989/392/CEE
- articles de la directive machines 1989/392/CEE
- Annexe I de la directive machines 1989/392/CEE
- Annexe II de la directive machines 1989/392/CEE
- Annexe III de la directive machines 1989/392/CEE
- Annexe IV de la directive machines 1989/392/CEE
- Annexe V de la directive machines 1989/392/CEE
- Annexe VI de la directive machines 1989/392/CEE
- Annexe VII de la directive machines 1989/392/CEE
- Amendements de la directive machines 1989/392/CEE
- guide de la Direction Générale du Travail modifications de machines
- Directives ATEX
- Directive ATEX 94/9/CE
- Considerants de la directive ATEX 94/9/CE
- Articles de la directive ATEX 94/9/CE
- Article 1 de la directive ATEX 94/9/CE
- Article 2 de la directive ATEX 94/9/CE
- Article 3 de la directive ATEX 94/9/CE
- Article 4 de la directive ATEX 94/9/CE
- Article 5 de la directive ATEX 94/9/CE
- Article 6 de la directive ATEX 94/9/CE
- Article 7 de la directive ATEX 94/9/CE
- Article 8 de la directive ATEX 94/9/CE
- Article 9 de la directive ATEX 94/9/CE
- Article 10 de la directive ATEX 94/9/CE
- Article 11 de la directive ATEX 94/9/CE
- Article 12 de la directive ATEX 94/9/CE
- Article 13 de la directive ATEX 94/9/CE
- Article 14 de la directive ATEX 94/9/CE
- Article 15 de la directive ATEX 94/9/CE
- Article 16 de la directive ATEX 94/9/CE
- ANNEXE I de la directive ATEX 94/9/CE : CRITÈRES DÉTERMINANT LA CLASSIFICATION DES GROUPES D'APPAREILS EN CATeGORIES
- ANNEXE II de la directive ATEX 94/9/CE : EXIGENCES ESSENTIELLES DE SeCURITe ET de SANTE
- ANNEXE III de la directive ATEX 94/9/CE : MODULE: EXAMEN CE DE TYPE
- ANNEXE IV de la directive ATEX 94/9/CE : MODULE: ASSURANCE QUALITE DE PRODUCTION
- ANNEXE V de la directive ATEX 94/9/CE : MODULE VÉRIFICATION SUR PRODUIT
- ANNEXE VI de la directive ATEX 94/9/CE : MODULE CONFORMITE AU TYPE
- ANNEXE VII de la directive ATEX 94/9/CE : MODULE ASSURANCE QUALITE DU PRODUIT
- ANNEXE VIII de la directive ATEX 94/9/CE : MODULE CONTROLE INTERNE DE FABRICATION
- ANNEXE IX de la directive ATEX 94/9/CE : MODULE: VERIFICATION À L'UNITE
- ANNEXE X de la directive ATEX 94/9/CE : marquage CE et contenu de la declaration CE de conformite
- ANNEXE XI de la directive ATEX 94/9/CE: NOTIFICATION DES ORGANISMES
- Directive ATEX 99/92/CE
- Directive ATEX 2014/34/UE
- Considérants de la directive ATEX 2014/34/UE
- les articles de la directive ATEX 2014/34/UE
- Annexe 1 de la directive ATEX 2014/34/UE
- Annexe 2 de la directive ATEX 2014/34/UE
- Annexe 3 de la directive ATEX 2014/34/UE
- Annexe 4 de la directive ATEX 2014/34/UE
- Annexe 5 de la directive ATEX 2014/34/UE
- Annexe 6 de la directive ATEX 2014/34/UE
- Annexe 7 de la directive ATEX 94/9/EC
- Annexe 8 de la directive ATEX 2014/34/UE
- Annexe 9 de la directive ATEX 2014/34/UE
- Annexe 10 de la directive ATEX 2014/34/UE
- Annexe 11 de la directive ATEX 2014/34/UE
- Annexe 12 de la directive ATEX 2014/34/UE
- La nouvelle directive ATEX
- Audits dans le domaine Ex - EN 13980, OD 005 et EN ISO / CEI 80079-34
- La déclaration CE de conformité en ATEX
- Directive ATEX 94/9/CE
- IECEX
- Normalisation & réglementation européenne
- Sécurité des machines - réglementation européenne et normalisation
- Réglementation européenne sur les machines - normes harmonisées
- Sécurité des machines : normalisation et réglementation européenn
- Normalisation dans le secteur des machines
- FD ISO/TR 14121-2 - Février 2008
- ISO 11161:2007
- ISO 13849-1:2006
- ISO 13849-2:2012
- ISO 13850:2006 - Sécurité des machines -- Arrêt d'urgence -- Principes de conception
- ISO 13851:2002 - Sécurité des machines -- Dispositifs de commande bimanuelle -- Aspects fonctionnels et principes de conception
- ISO 13854:1996 - Sécurité des machines -- Écartements minimaux pour prévenir les risques d'écrasement de parties du corps humain
- ISO 13854:1996 Sécurité des machines -- Écartements minimaux pour prévenir les risques d'écrasement de parties du corps humain
- ISO 13855:2010 - Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body
- ISO 13856-1:2013 Sécurité des machines -- Dispositifs de protection sensibles à la pression -- Partie 1
- ISO 13856-2:2013 - Sécurité des machines -- Dispositifs de protection sensibles à la pression -- Partie 2: Principes généraux
- ISO 13856-3:2013 Sécurité des machines -- Dispositifs de protection sensibles à la pression - Partie 3
- ISO 13857:2008 Sécurité des machines - Distances de sécurité - zones dangereuses
- ISO 14119:2013- Dispositifs de verrouillage associés à des protecteurs
- ISO 14120:2002 -Protecteurs - Prescriptions generales pour la conception et la construction
- ISO 14122-2:2001 - Moyens d'acces permanents aux machines
- ISO 14122-3:2001- Moyens d'acces permanents aux machines
- ISO 14122-4:2004 - Moyens d'acces permanents aux machines
- ISO 14123-1:1998 - Reduction des risques pour la sante resultant de substances dangereuses emises par des machines
- ISO 14123-2:1998 - Reduction des risques pour la sante resultant de substances dangereuses emises par des machines -- Partie 2
- ISO 14159:2002 - Prescriptions relatives à l'hygiene lors de la conception des machines
- ISO 19353:2005 Securite des machines - Prevention et protection contre l'incendie
- ISO/DTR 22100-2 - Securite des machines - Partie 2: La relation entre l'ISO 12100 et l'ISO 13849
- ISO/TR 14121-2:2012 - Appréciation du risque - Partie 2: Lignes directrices pratiques et exemples
- ISO/TR 18569:2004 - Lignes directrices pour la comprehension et l'utilisation des normes sur la securite des machines
- ISO/TR 23849:2010 - Lignes directrices relatives à l'application de l'ISO 13849-1 et de la CEI 62061
- NF EN ISO 12100 Novembre 2010
- NF EN ISO 12100-1 - Janvier 2004
- NF EN ISO 12100-1/A1 Août 2009
- NF EN ISO 12100-2 JANVIER 2004
- NF EN ISO 12100-2/A1 Août 2009
- NF EN ISO 14121-1 - Novembre 2007
- Liste des normes harmonisées - directive machines 2006/42/CE
- Liste des normes harminisées - directive machines 2006/42/CE - 09.06.2017
- Liste des normes harmonisées - directive machines - OJ C 2016/C173/01 du 15/05/2016
- Liste des normes harmonisées - directive machines 2006/42/CE - corrigendum OJ C 2015/C 087/03 du 13/03/2015
- Liste des normes harmonisées - directive machines - OJ C 2015/C 054/01 du 13/02/2015
- Liste des normes harmonisées - directive machines - OJ C 220 du 11/07/2014
- Liste des normes harmonisées - directive machines - OJ C 110 du 11/04/2014
- Liste des normes harmonisées - directive machines - OJ C 348 du 28/11/2013
- Liste des normes harmonisées directive machines - OJ C 099 du 05/04/2013
- Guide d'application de la directive machines 2006/42/CE, recommendations for use - normes harmonisées
- recommendation for use - directive machines 2006/42/CE
- Organismes notifiés au titre de la directive machines 2006/42/CE
- Sécurité de matériels et équipements EX, IECEx : Normalisation - réglementation européenne
- Normalisation dans le domaine des ATEX et des Ex
- liste des normes harmonisées - directive ATEX 94/9/CE
- Liste des normes harmonisées directive ATEX 2014/34/UE - 12-10-2018
- Harmonized standards list ATEX 94/9/EC directive - OJ C 126 - 08/04/2016
- Liste des normes harmonisées directive ATEX 94/9/CE - OJ C 335 - 09/10/2015
- Liste des normes harmonisées directive ATEX 94/9/CE - OJ-C 445-02 - 12/12/2014
- Liste des normes harmonisées directive ATEX 94/9/CE - OJ-C 076-14/03/2014
- Liste des normes harmonisées - directive ATEX 94/9/CE - OJ-C 319 05/11/2013
- Réglementation européenne pour la directive ATEX 94/9/CE
- Guide d'application de la directive ATEX 94/9/CE
- Guide d'application de la directive ATEX 2014/34/UE
- Alignement de dix directives d’harmonisation technique sur la décision n° 768/2008/CE
- Sécurité des machines - réglementation européenne et normalisation
- Dernières news
- Sécurité fonctionnelle
- Les dispositifs de sécurité en ATEX
- Historique des normes de sécurité fonctionnelle et directive machines
- Sécurité fonctionnelle
- Principes de sécurité éprouvés : l'action mécanique positive
- la sécurité fonctionnelle et les réseaux de terrain
- les microprocesseurs dans les techniques de sécurité
- principes de conception sûr - Les relais de sécurité et les machines
- prévention de la mise en marche intempestive norme EN 1037+A1
- Sécurité fonctionnelle - les codes détecteurs d'erreur - parité et chechsum
- Sécurité fonctionnelle - les codes détecteurs d'erreur - le CRC et les codes de Hamming
- Nouveau règlement machines 2023/1230
normes harmonisées pour la directive EPI 89/686/EEC - 2014/12/12 C 445/17
12.12.2014 |
EN |
Official Journal of the European Union |
C 445/17 |
Commission communication in the framework of the implementation of the Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2014/C 445/03)
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard |
CEN |
EN 132:1998 Respiratory protective devices — Definitions of terms and pictograms |
4.6.1999 |
EN 132:1990 |
Date expired (30.6.1999) |
CEN |
EN 133:2001 Respiratory protective devices — Classification |
10.8.2002 |
EN 133:1990 |
Date expired (10.8.2002) |
CEN |
EN 134:1998 Respiratory protective devices — Nomenclature of components |
13.6.1998 |
EN 134:1990 |
Date expired (31.7.1998) |
CEN |
EN 135:1998 Respiratory protective devices — List of equivalent terms |
4.6.1999 |
EN 135:1990 |
Date expired (30.6.1999) |
CEN |
EN 136:1998 Respiratory protective devices — Full face masks — Requirements, testing, marking |
13.6.1998 |
EN 136:1989 EN 136-10:1992 |
Date expired (31.7.1998) |
|
EN 136:1998/AC:2003 |
|
|
|
CEN |
EN 137:2006 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking |
23.11.2007 |
EN 137:1993 |
Date expired (23.11.2007) |
CEN |
EN 138:1994 Respiratory protective devices — Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly — Requirements, testing, marking |
16.12.1994 |
|
|
CEN |
EN 140:1998 Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking |
6.11.1998 |
EN 140:1989 |
Date expired (31.3.1999) |
|
EN 140:1998/AC:1999 |
|
|
|
CEN |
EN 142:2002 Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking |
10.4.2003 |
EN 142:1989 |
Date expired (10.4.2003) |
CEN |
EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking |
24.1.2001 |
EN 143:1990 |
Date expired (24.1.2001) |
|
EN 143:2000/A1:2006 |
21.12.2006 |
Date expired (21.12.2006) |
|
|
EN 143:2000/AC:2005 |
|
|
|
CEN |
EN 144-1:2000 Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector |
24.1.2001 |
EN 144-1:1991 |
Date expired (24.1.2001) |
|
EN 144-1:2000/A1:2003 |
21.2.2004 |
Date expired (21.2.2004) |
|
|
EN 144-1:2000/A2:2005 |
6.10.2005 |
Date expired (31.12.2005) |
|
CEN |
EN 144-2:1998 Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections |
4.6.1999 |
|
|
CEN |
EN 144-3:2003 Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen |
21.2.2004 |
|
|
|
EN 144-3:2003/AC:2003 |
|
|
|
CEN |
EN 145:1997 Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking |
19.2.1998 |
EN 145:1988 EN 145-2:1992 |
Date expired (28.2.1998) |
|
EN 145:1997/A1:2000 |
24.1.2001 |
Date expired (24.1.2001) |
|
CEN |
EN 148-1:1999 Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection |
4.6.1999 |
EN 148-1:1987 |
Date expired (31.8.1999) |
CEN |
EN 148-2:1999 Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection |
4.6.1999 |
EN 148-2:1987 |
Date expired (31.8.1999) |
CEN |
EN 148-3:1999 Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3 |
4.6.1999 |
EN 148-3:1992 |
Date expired (31.8.1999) |
CEN |
EN 149:2001+A1:2009 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking |
6.5.2010 |
EN 149:2001 |
Date expired (6.5.2010) |
CEN |
EN 166:2001 Personal eye-protection — Specifications |
10.8.2002 |
EN 166:1995 |
Date expired (10.8.2002) |
CEN |
EN 167:2001 Personal eye-protection — Optical test methods |
10.8.2002 |
EN 167:1995 |
Date expired (10.8.2002) |
CEN |
EN 168:2001 Personal eye-protection — Non-optical test methods |
10.8.2002 |
EN 168:1995 |
Date expired (10.8.2002) |
CEN |
EN 169:2002 Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use |
28.8.2003 |
EN 169:1992 |
Date expired (28.8.2003) |
CEN |
EN 170:2002 Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use |
28.8.2003 |
EN 170:1992 |
Date expired (28.8.2003) |
CEN |
EN 171:2002 Personal eye-protection — Infrared filters — Transmittance requirements and recommended use |
10.4.2003 |
EN 171:1992 |
Date expired (10.4.2003) |
CEN |
EN 172:1994 Personal eye-protection — Sunglare filters for industrial use |
15.5.1996 |
|
|
|
EN 172:1994/A1:2000 |
4.7.2000 |
Date expired (31.10.2000) |
|
|
EN 172:1994/A2:2001 |
10.8.2002 |
Date expired (10.8.2002) |
|
CEN |
EN 174:2001 Personal eye-protection — Ski goggles for downhill skiing |
21.12.2001 |
EN 174:1996 |
Date expired (21.12.2001) |
CEN |
EN 175:1997 Personal protection — Equipment for eye and face protection during welding and allied processes |
19.2.1998 |
|
|
CEN |
EN 207:2009 Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors) |
6.5.2010 |
EN 207:1998 |
Date expired (30.6.2010) |
|
EN 207:2009/AC:2011 |
|
|
|
CEN |
EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
6.5.2010 |
EN 208:1998 |
Date expired (30.6.2010) |
CEN |
EN 250:2014 Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing and marking |
12.12.2014 |
EN 250:2000 |
31.12.2014 |
CEN |
EN 269:1994 Respiratory protective devices — Powered fresh air hose breathing apparatus incorporating a hood — Requirements, testing, marking |
16.12.1994 |
|
|
CEN |
EN 342:2004 Protective clothing — Ensembles and garments for protection against cold |
6.10.2005 |
|
|
|
EN 342:2004/AC:2008 |
|
|
|
CEN |
EN 343:2003+A1:2007 Protective clothing — Protection against rain |
8.3.2008 |
EN 343:2003 |
Date expired (8.3.2008) |
|
EN 343:2003+A1:2007/AC:2009 |
|
|
|
CEN |
EN 348:1992 Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal |
23.12.1993 |
|
|
|
EN 348:1992/AC:1993 |
|
|
|
CEN |
EN 352-1:2002 Hearing protectors — General requirements — Part 1: Ear-Muffs |
28.8.2003 |
EN 352-1:1993 |
Date expired (28.8.2003) |
CEN |
EN 352-2:2002 Hearing protectors — General requirements — Part 2: Ear-plugs |
28.8.2003 |
EN 352-2:1993 |
Date expired (28.8.2003) |
CEN |
EN 352-3:2002 Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet |
28.8.2003 |
EN 352-3:1996 |
Date expired (28.8.2003) |
CEN |
EN 352-4:2001 Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs |
10.8.2002 |
|
|
|
EN 352-4:2001/A1:2005 |
19.4.2006 |
Date expired (30.4.2006) |
|
CEN |
EN 352-5:2002 Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs |
28.8.2003 |
|
|
|
EN 352-5:2002/A1:2005 |
6.5.2010 |
Date expired (6.5.2010) |
|
CEN |
EN 352-6:2002 Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input |
28.8.2003 |
|
|
CEN |
EN 352-7:2002 Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs |
28.8.2003 |
|
|
CEN |
EN 352-8:2008 Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs |
28.1.2009 |
|
|
CEN |
EN 353-2:2002 Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line |
28.8.2003 |
EN 353-2:1992 |
Date expired (28.8.2003) |
CEN |
EN 354:2010 Personal fall protection equipment — Lanyards |
9.7.2011 |
EN 354:2002 |
Date expired (9.7.2011) |
CEN |
EN 355:2002 Personal protective equipment against falls from a height — Energy absorbers |
28.8.2003 |
EN 355:1992 |
Date expired (28.8.2003) |
CEN |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards |
21.12.2001 |
EN 358:1992 |
Date expired (21.12.2001) |
CEN |
EN 360:2002 Personal protective equipment against falls from a height — Retractable type fall arresters |
28.8.2003 |
EN 360:1992 |
Date expired (28.8.2003) |
CEN |
EN 361:2002 Personal protective equipment against falls from a height — Full body harnesses |
28.8.2003 |
EN 361:1992 |
Date expired (28.8.2003) |
CEN |
EN 362:2004 Personal protective equipment against falls from a height — Connectors |
6.10.2005 |
EN 362:1992 |
Date expired (6.10.2005) |
CEN |
EN 363:2008 Personal fall protection equipment — Personal fall protection systems |
20.6.2008 |
EN 363:2002 |
Date expired (31.8.2008) |
CEN |
EN 364:1992 Personal protective equipment against falls from a height — Test methods |
23.12.1993 |
|
|
|
EN 364:1992/AC:1993 |
|
|
|
CEN |
EN 365:2004 Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
6.10.2005 |
EN 365:1992 |
Date expired (6.10.2005) |
|
EN 365:2004/AC:2006 |
|
|
|
CEN |
EN 367:1992 Protective clothing — Protection against heat and fire — Method of determining heat transmission on exposure to flame |
23.12.1993 |
|
|
|
EN 367:1992/AC:1992 |
|
|
|
CEN |
EN 374-1:2003 Protective gloves against chemicals and micro-organisms — Part 1: Terminology and performance requirements |
6.10.2005 |
EN 374-1:1994 |
Date expired (6.10.2005) |
CEN |
EN 374-2:2003 Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance to penetration |
6.10.2005 |
EN 374-2:1994 |
Date expired (6.10.2005) |
CEN |
EN 374-3:2003 Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance to permeation by chemicals |
6.10.2005 |
EN 374-3:1994 |
Date expired (6.10.2005) |
|
EN 374-3:2003/AC:2006 |
|
|
|
CEN |
EN 374-4:2013 Protective gloves against chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals |
11.4.2014 |
|
|
CEN |
EN 379:2003+A1:2009 Personal eye-protection — Automatic welding filters |
6.5.2010 |
EN 379:2003 |
Date expired (6.5.2010) |
CEN |
EN 381-1:1993 Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw |
23.12.1993 |
|
|
CEN |
EN 381-2:1995 Protective clothing for users of hand-held chain saws — Part 2: Test methods for leg protectors |
12.1.1996 |
|
|
CEN |
EN 381-3:1996 Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear |
10.10.1996 |
|
|
CEN |
EN 381-4:1999 Protective clothing for users of hand-held chainsaws — Part 4: Test methods for chainsaw protective gloves |
16.3.2000 |
|
|
CEN |
EN 381-5:1995 Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors |
12.1.1996 |
|
|
CEN |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves |
16.3.2000 |
|
|
CEN |
EN 381-8:1997 Protective clothing for users of hand-held chain saws — Part 8: Test methods for chain saw protective gaiters |
18.10.1997 |
|
|
CEN |
EN 381-9:1997 Protective clothing for users of hand-held chain saws — Part 9: Requirements for chain saw protective gaiters |
18.10.1997 |
|
|
CEN |
EN 381-10:2002 Protective clothing for users of hand-held chainsaws — Part 10: Test method for upper body protectors |
28.8.2003 |
|
|
CEN |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors |
28.8.2003 |
|
|
CEN |
EN 388:2003 Protective gloves against mechanical risks |
6.10.2005 |
EN 388:1994 |
Date expired (6.10.2005) |
CEN |
EN 397:2012+A1:2012 Industrial safety helmets |
20.12.2012 |
EN 397:2012 |
Date expired (30.4.2013) |
CEN |
EN 402:2003 Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking |
21.2.2004 |
EN 402:1993 |
Date expired (21.2.2004) |
CEN |
EN 403:2004 Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking |
6.10.2005 |
EN 403:1993 |
Date expired (6.10.2005) |
CEN |
EN 404:2005 Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly |
6.10.2005 |
EN 404:1993 |
Date expired (2.12.2005) |
CEN |
EN 405:2001+A1:2009 Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking |
6.5.2010 |
EN 405:2001 |
Date expired (6.5.2010) |
CEN |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
6.10.2005 |
EN 407:1994 |
Date expired (6.10.2005) |
CEN |
EN 420:2003+A1:2009 Protective gloves — General requirements and test methods |
6.5.2010 |
EN 420:2003 |
Date expired (31.5.2010) |
CEN |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
9.7.2011 |
EN 421:1994 |
Date expired (9.7.2011) |
CEN |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
20.6.2008 |
EN 443:1997 |
Date expired (31.8.2008) |
CEN |
EN 458:2004 Hearing protectors — Recommendations for selection, use, care and maintenance — Guidance document |
6.10.2005 |
EN 458:1993 |
Date expired (6.10.2005) |
CEN |
EN 464:1994 Protective clothing — Protection against liquid and gaseous chemicals, including aerosols and solid particles — Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
16.12.1994 |
|
|
CEN |
EN 469:2014 Protective clothing for firefighters — Performance requirements for protective clothing for firefighting |
12.12.2014 |
EN 469:2005 |
31.1.2015 |
CEN |
EN 510:1993 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
16.12.1994 |
|
|
CEN |
EN 511:2006 Protective gloves against cold |
21.12.2006 |
EN 511:1994 |
Date expired (21.12.2006) |
CEN |
EN 530:2010 Abrasion resistance of protective clothing material — Test methods |
9.7.2011 |
EN 530:1994 |
Date expired (9.7.2011) |
CEN |
EN 564:2006 Mountaineering equipment — Accessory cord — Safety requirements and test methods |
8.3.2008 |
EN 564:1997 |
Date expired (8.3.2008) |
CEN |
EN 565:2006 Mountaineering equipment — Tape — Safety requirements and test methods |
8.3.2008 |
EN 565:1997 |
Date expired (8.3.2008) |
CEN |
EN 566:2006 Mountaineering equipment — Slings — Safety requirements and test methods |
8.3.2008 |
EN 566:1997 |
Date expired (8.3.2008) |
CEN |
EN 567:2013 Mountaineering equipment — Rope clamps — Safety requirements and test methods |
28.6.2013 |
EN 567:1997 |
Date expired (30.9.2013) |
CEN |
EN 568:2007 Mountaineering equipment — Ice anchors — Safety requirements and test methods |
8.3.2008 |
EN 568:1997 |
Date expired (8.3.2008) |
CEN |
EN 569:2007 Mountaineering equipment — Pitons — Safety requirements and test methods |
8.3.2008 |
EN 569:1997 |
Date expired (8.3.2008) |
CEN |
EN 659:2003+A1:2008 Protective gloves for firefighters |
20.6.2008 |
EN 659:2003 |
Date expired (30.9.2008) |
|
EN 659:2003+A1:2008/AC:2009 |
|
|
|
CEN |
EN 702:1994 Protective clothing — Protection against heat and flame — Test method: Determination of the contact heat transmission through protective clothing or its materials |
12.1.1996 |
|
|
CEN |
EN 795:1996 Protection against falls from a height — Anchor devices — Requirements and testing |
12.2.2000 |
|
|
|
EN 795:1996/A1:2000 |
24.1.2001 |
Date expired (30.4.2001) |
|
Warning: This publication does not concern the equipment described in classes A (structural anchors), C (anchor devices employing horizontal flexible lines) and D (anchor devices employing horizontal rigid anchor rails) referred to in paragraphs 3.13.1, 3.13.3, 3.13.4, 4.3.1, 4.3.3, 4.3.4, 5.2.1, 5.2.2, 5.2.4, 5.2.5, 5.3.2 (in respect of class A1), 5.3.3, 5.3.4, 5.3.5, 6 (in respect of classes A, C and D), Annex A (paragraphs A.2, A.3, A.5 and A.6), Annex B, and Annex ZA (in respect of classes A, C and D), in respect of which there shall be no presumption of conformity with the provisions of Directive 89/686/EEC. |
||||
CEN |
EN 812:2012 Industrial bump caps |
20.12.2012 |
EN 812:1997 |
Date expired (30.4.2013) |
CEN |
EN 813:2008 Personal fall protection equipment — Sit harnesses |
28.1.2009 |
EN 813:1997 |
Date expired (28.2.2009) |
CEN |
EN 863:1995 Protective clothing — Mechanical properties — Test method: Puncture resistance |
15.5.1996 |
|
|
CEN |
EN 892:2012 Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods |
20.12.2012 |
EN 892:2004 |
Date expired (30.4.2013) |
CEN |
EN 893:2010 Mountaineering equipment — Crampons — Safety requirements and test methods |
9.7.2011 |
EN 893:1999 |
Date expired (9.7.2011) |
CEN |
EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 1: Performance requirements for ventilated and non-ventilated ‘gas-tight’ (Type 1) and ‘non-gas-tight’ (Type 2) chemical protective suits |
28.8.2003 |
|
|
|
EN 943-1:2002/AC:2005 |
|
|
|
CEN |
EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 2: Performance requirements for ‘gas-tight’ (Type 1) chemical protective suits for emergency teams (ET) |
10.8.2002 |
|
|
CEN |
EN 958:2006+A1:2010 Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods |
9.7.2011 |
EN 958:2006 |
Date expired (9.7.2011) |
CEN |
EN 960:2006 Headforms for use in the testing of protective helmets |
21.12.2006 |
EN 960:1994 |
Date expired (31.12.2006) |
CEN |
EN 966:2012+A1:2012 Helmets for airborne sports |
20.12.2012 |
EN 966:2012 |
Date expired (30.4.2013) |
CEN |
EN 1073-1:1998 Protective clothing against radioactive contamination — Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination |
6.11.1998 |
|
|
CEN |
EN 1073-2:2002 Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
28.8.2003 |
|
|
CEN |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
8.3.2008 |
EN 1077:1996 |
Date expired (8.3.2008) |
CEN |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
20.12.2012 |
EN 1078:2012 |
Date expired (30.4.2013) |
CEN |
EN 1080:2013 Impact protection helmets for young children |
28.6.2013 |
EN 1080:1997 |
Date expired (31.8.2013) |
CEN |
EN 1082-1:1996 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards |
14.6.1997 |
|
|
CEN |
EN 1082-2:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail |
21.12.2001 |
|
|
CEN |
EN 1082-3:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials |
21.12.2001 |
|
|
CEN |
EN 1146:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking |
19.4.2006 |
EN 1146:1997 |
Date expired (30.4.2006) |
CEN |
EN 1149-1:2006 Protective clothing — Electrostatic properties — Part 1: Test method for measurement of surface resistivity |
21.12.2006 |
EN 1149-1:1995 |
Date expired (31.12.2006) |
CEN |
EN 1149-2:1997 Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
19.2.1998 |
|
|
CEN |
EN 1149-3:2004 Protective clothing — Electrostatic properties — Part 3: Test methods for measurement of charge decay |
6.10.2005 |
|
|
CEN |
EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements |
20.6.2008 |
|
|
CEN |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
4.6.1999 |
|
|
CEN |
EN 1385:2012 Helmets for canoeing and white water sports |
20.12.2012 |
EN 1385:1997 |
Date expired (30.4.2013) |
CEN |
EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting |
8.3.2008 |
EN 1486:1996 |
Date expired (30.4.2008) |
CEN |
EN 1497:2007 Personal fall protection equipment — Rescue harnesses |
8.3.2008 |
|
|
CEN |
EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact — Part 1: Motorcyclists' limb joint impact protectors — Requirements and test methods |
13.3.2013 |
EN 1621-1:1997 |
Date expired (30.6.2013) |
CEN |
EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact — Part 2: Motorcyclists' back protectors — Requirements and test methods |
12.12.2014 |
EN 1621-2:2003 |
31.12.2014 |
CEN |
EN 1731:2006 Personal eye protection — Mesh eye and face protectors |
23.11.2007 |
EN 1731:1997 |
Date expired (23.11.2007) |
CEN |
EN 1809:2014 Diving equipment — Buoyancy compensators — Functional and safety requirements, test methods |
12.12.2014 |
EN 1809:1997 |
31.12.2014 |
CEN |
EN 1827:1999+A1:2009 Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking |
6.5.2010 |
EN 1827:1999 |
Date expired (6.5.2010) |
CEN |
EN 1868:1997 Personal protective equipment against falls from a height — List of equivalent terms |
18.10.1997 |
|
|
CEN |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes |
6.11.1998 |
|
|
CEN |
EN 1938:2010 Personal eye protection — Goggles for motorcycle and moped users |
9.7.2011 |
EN 1938:1998 |
Date expired (9.7.2011) |
CEN |
EN ISO 4869-2:1995 Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
15.5.1996 |
|
|
|
EN ISO 4869-2:1995/AC:2007 |
|
|
|
CEN |
EN ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
8.3.2008 |
EN 24869-3:1993 |
Date expired (8.3.2008) |
CEN |
EN ISO 6529:2001 Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
6.10.2005 |
EN 369:1993 |
Date expired (6.10.2005) |
CEN |
EN ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
6.10.2005 |
EN 368:1992 |
Date expired (6.10.2005) |
CEN |
EN ISO 6942:2002 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
28.8.2003 |
EN 366:1993 |
Date expired (28.8.2003) |
CEN |
EN ISO 9185:2007 Protective clothing — Assessment of resistance of materials to molten metal splash (ISO 9185:2007) |
8.3.2008 |
EN 373:1993 |
Date expired (8.3.2008) |
CEN |
EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003) |
6.10.2005 |
EN 967:1996 |
Date expired (6.10.2005) |
CEN |
EN ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
13.12.2013 |
EN ISO 10819:1996 |
Date expired (13.12.2013) |
CEN |
EN ISO 10862:2009 Small craft — Quick release system for trapeze harness (ISO 10862:2009) |
6.5.2010 |
|
|
CEN |
EN ISO 11611:2007 Protective clothing for use in welding and allied processes (ISO 11611:2007) |
8.3.2008 |
EN 470-1:1995 |
Date expired (30.4.2008) |
CEN |
EN ISO 11612:2008 Protective clothing — Clothing to protect against heat and flame (ISO 11612:2008) |
5.6.2009 |
EN 531:1995 |
Date expired (5.6.2009) |
CEN |
EN 12021:2014 Respiratory equipment — Compressed gases for breathing apparatus |
12.12.2014 |
|
|
CEN |
EN 12083:1998 Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking |
4.7.2000 |
|
|
|
EN 12083:1998/AC:2000 |
|
|
|
CEN |
EN ISO 12127-2:2007 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) |
8.3.2008 |
|
|
CEN |
EN 12270:2013 Mountaineering equipment — Chocks — Safety requirements and test methods |
11.4.2014 |
EN 12270:1998 |
Date expired (31.5.2014) |
CEN |
EN 12275:2013 Mountaineering equipment — Connectors — Safety requirements and test methods |
13.12.2013 |
EN 12275:1998 |
Date expired (13.12.2013) |
CEN |
EN 12276:2013 Mountaineering equipment — Frictional anchors — Safety requirements and test methods |
11.4.2014 |
EN 12276:1998 |
Date expired (31.5.2014) |
CEN |
EN 12277:2007 Mountaineering equipment — Harnesses — Safety requirements and test methods |
23.11.2007 |
EN 12277:1998 |
Date expired (23.11.2007) |
CEN |
EN 12278:2007 Montaineering equipment — Pulleys — Safety requirements and test methods |
23.11.2007 |
EN 12278:1998 |
Date expired (30.11.2007) |
CEN |
EN ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15) |
13.12.2013 |
|
|
CEN |
EN ISO 12312-1:2013 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013) |
13.12.2013 |
EN 1836:2005+A1:2007 |
28.2.2015 |
CEN |
EN ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009) |
6.5.2010 |
EN 1095:1998 |
Date expired (6.5.2010) |
CEN |
EN ISO 12402-2:2006 Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements (ISO 12402-2:2006) |
21.12.2006 |
EN 399:1993 |
Date expired (31.3.2007) |
|
EN ISO 12402-2:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
|
CEN |
EN ISO 12402-3:2006 Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements (ISO 12402-3:2006) |
21.12.2006 |
EN 396:1993 |
Date expired (31.3.2007) |
|
EN ISO 12402-3:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
|
CEN |
EN ISO 12402-4:2006 Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements (ISO 12402-4:2006) |
21.12.2006 |
EN 395:1993 |
Date expired (31.3.2007) |
|
EN ISO 12402-4:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
|
CEN |
EN ISO 12402-5:2006 Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006) |
21.12.2006 |
EN 393:1993 |
Date expired (31.3.2007) |
|
EN ISO 12402-5:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
|
|
EN ISO 12402-5:2006/AC:2006 |
|
|
|
CEN |
EN ISO 12402-6:2006 Personal flotation devices — Part 6: Special purpose life jackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006) |
21.12.2006 |
|
|
|
EN ISO 12402-6:2006/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
|
CEN |
EN ISO 12402-8:2006 Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006) |
2.8.2006 |
EN 394:1993 |
Date expired (31.8.2006) |
|
EN ISO 12402-8:2006/A1:2011 |
11.11.2011 |
Date expired (11.11.2011) |
|
CEN |
EN ISO 12402-9:2006 Personal flotation devices — Part 9: Test methods (ISO 12402-9:2006) |
21.12.2006 |
|
|
|
EN ISO 12402-9:2006/A1:2011 |
11.11.2011 |
Date expired (11.11.2011) |
|
CEN |
EN ISO 12402-10:2006 Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) |
2.8.2006 |
|
|
CEN |
EN 12477:2001 Protective gloves for welders |
10.8.2002 |
|
|
|
EN 12477:2001/A1:2005 |
6.10.2005 |
Date expired (31.12.2005) |
|
CEN |
EN 12492:2012 Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods |
20.12.2012 |
EN 12492:2000 |
Date expired (30.4.2013) |
CEN |
EN 12628:1999 Diving accessories — Combined buoyancy and rescue devices — Functional and safety requirements, test methods |
4.7.2000 |
|
|
|
EN 12628:1999/AC:2000 |
|
|
|
CEN |
EN 12841:2006 Personal fall protection equipment — Rope access systems — Rope adjustment devices |
21.12.2006 |
|
|
CEN |
EN 12941:1998 Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking |
4.6.1999 |
EN 146:1991 |
Date expired (4.6.1999) |
|
EN 12941:1998/A1:2003 |
6.10.2005 |
Date expired (6.10.2005) |
|
|
EN 12941:1998/A2:2008 |
5.6.2009 |
Date expired (5.6.2009) |
|
CEN |
EN 12942:1998 Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking |
4.6.1999 |
EN 147:1991 |
Date expired (4.6.1999) |
|
EN 12942:1998/A1:2002 |
28.8.2003 |
Date expired (28.8.2003) |
|
|
EN 12942:1998/A2:2008 |
5.6.2009 |
Date expired (5.6.2009) |
|
CEN |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
6.5.2010 |
EN 13034:2005 |
Date expired (6.5.2010) |
CEN |
EN 13061:2009 Protective clothing — Shin guards for association football players — Requirements and test methods |
6.5.2010 |
EN 13061:2001 |
Date expired (6.5.2010) |
CEN |
EN 13087-1:2000 Protective helmets — Test methods — Part 1: Conditions and conditioning |
10.8.2002 |
|
|
|
EN 13087-1:2000/A1:2001 |
10.8.2002 |
Date expired (10.8.2002) |
|
CEN |
EN 13087-2:2012 Protective helmets — Test methods — Part 2: Shock absorption |
20.12.2012 |
EN 13087-2:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-3:2000 Protective helmets — Test methods — Part 3: Resistance to penetration |
10.8.2002 |
|
|
|
EN 13087-3:2000/A1:2001 |
10.8.2002 |
Date expired (10.8.2002) |
|
CEN |
EN 13087-4:2012 Protective helmets — Test methods — Part 4: Retention system effectiveness |
20.12.2012 |
EN 13087-4:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-5:2012 Protective helmets — Test methods — Part 5: Retention system strength |
20.12.2012 |
EN 13087-5:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-6:2012 Protective helmets — Test methods — Part 6: Field of vision |
20.12.2012 |
EN 13087-6:2000 |
Date expired (30.4.2013) |
CEN |
EN 13087-7:2000 Protective helmets — Test methods — Part 7: Flame resistance |
10.8.2002 |
|
|
|
EN 13087-7:2000/A1:2001 |
10.8.2002 |
Date expired (10.8.2002) |
|
CEN |
EN 13087-8:2000 Protective helmets — Test methods — Part 8: Electrical properties |
21.12.2001 |
|
|
|
EN 13087-8:2000/A1:2005 |
6.10.2005 |
Date expired (6.10.2005) |
|
CEN |
EN 13087-10:2012 Protective helmets — Test methods — Part 10: Resistance to radiant heat |
20.12.2012 |
EN 13087-10:2000 |
Date expired (30.4.2013) |
CEN |
EN 13089:2011 Mountaineering equipment — Ice-tools — Safety requirements and test methods |
9.7.2011 |
|
|
CEN |
EN 13138-1:2008 Buoyant aids for swimming instruction — Part 1: Safety requirements and test methods for buoyant aids to be worn |
5.6.2009 |
EN 13138-1:2003 |
Date expired (5.6.2009) |
CEN |
EN 13158:2009 Protective clothing — Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers — Requirements and test methods |
6.5.2010 |
EN 13158:2000 |
Date expired (6.5.2010) |
CEN |
EN 13178:2000 Personal eye-protection — Eye protectors for snowmobile users |
21.12.2001 |
|
|
CEN |
EN 13274-1:2001 Respiratory protective devices — Methods of test — Part 1: Determination of inward leakage and total inward leakage |
21.12.2001 |
|
|
CEN |
EN 13274-2:2001 Respiratory protective devices — Methods of test — Part 2: Practical performance tests |
21.12.2001 |
|
|
CEN |
EN 13274-3:2001 Respiratory protective devices — Methods of test — Part 3: Determination of breathing resistance |
10.8.2002 |
|
|
CEN |
EN 13274-4:2001 Respiratory protective devices — Methods of test — Part 4: Flame tests |
10.8.2002 |
|
|
CEN |
EN 13274-5:2001 Respiratory protective devices — Methods of test — Part 5: Climatic conditions |
21.12.2001 |
|
|
CEN |
EN 13274-6:2001 Respiratory protective devices — Methods of test — Part 6: Determination of carbon dioxide content of the inhalation air |
10.8.2002 |
|
|
CEN |
EN 13274-7:2008 Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration |
20.6.2008 |
EN 13274-7:2002 |
Date expired (31.7.2008) |
CEN |
EN 13274-8:2002 Respiratory protective devices — Methods of test — Part 8: Determination of dolomite dust clogging |
28.8.2003 |
|
|
CEN |
EN 13277-1:2000 Protective equipment for martial arts — Part 1: General requirements and test methods |
24.2.2001 |
|
|
CEN |
EN 13277-2:2000 Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
24.2.2001 |
|
|
CEN |
EN 13277-3:2013 Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors |
11.4.2014 |
EN 13277-3:2000 |
Date expired (30.6.2014) |
CEN |
EN 13277-4:2001 Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
10.8.2002 |
|
|
|
EN 13277-4:2001/A1:2007 |
23.11.2007 |
Date expired (31.12.2007) |
|
CEN |
EN 13277-5:2002 Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
10.8.2002 |
|
|
CEN |
EN 13277-6:2003 Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females |
21.2.2004 |
|
|
CEN |
EN 13277-7:2009 Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors |
6.5.2010 |
|
|
CEN |
EN ISO 13287:2012 Personal protective equipment — Footwear — Test method for slip resistance (ISO 13287:2012) |
13.3.2013 |
EN ISO 13287:2007 |
Date expired (30.4.2013) |
CEN |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
21.12.2001 |
|
|
CEN |
EN 13484:2012 Helmets for users of luges |
20.12.2012 |
EN 13484:2001 |
Date expired (30.4.2013) |
CEN |
EN 13546:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods |
23.11.2007 |
EN 13546:2002 |
Date expired (31.12.2007) |
CEN |
EN 13567:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods |
23.11.2007 |
EN 13567:2002 |
Date expired (31.12.2007) |
CEN |
EN 13594:2002 Protective gloves for professional motorcycle riders — Requirements and test methods |
28.8.2003 |
|
|
CEN |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
28.8.2003 |
|
|
CEN |
EN 13595-2:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 2: Test method for determination of impact abrasion resistance |
28.8.2003 |
|
|
CEN |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
28.8.2003 |
|
|
CEN |
EN 13595-4:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 4: Test method for determination of impact cut resistance |
28.8.2003 |
|
|
CEN |
EN 13634:2010 Protective footwear for motorcycle riders — Requirements and test methods |
9.7.2011 |
EN 13634:2002 |
Date expired (9.7.2011) |
CEN |
EN ISO 13688:2013 Protective clothing — General requirements (ISO 13688:2013) |
13.12.2013 |
EN 340:2003 |
Date expired (31.1.2014) |
CEN |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
20.12.2012 |
EN 13781:2001 |
Date expired (30.4.2013) |
CEN |
EN 13794:2002 Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking |
28.8.2003 |
EN 1061:1996 EN 400:1993 EN 401:1993 |
Date expired (28.8.2003) |
CEN |
EN 13819-1:2002 Hearing protectors — Testing — Part 1: Physical test methods |
28.8.2003 |
|
|
CEN |
EN 13819-2:2002 Hearing protectors — Testing — Part 2: Acoustic test methods |
28.8.2003 |
|
|
CEN |
EN 13832-1:2006 Footwear protecting against chemicals — Part 1: Terminology and test methods |
21.12.2006 |
|
|
CEN |
EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
CEN |
EN 13832-3:2006 Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
CEN |
EN 13911:2004 Protective clothing for firefighters — Requirements and test methods for fire hoods for firefighters |
6.10.2005 |
|
|
CEN |
EN 13921:2007 Personal protective equipment — Ergonomic principles |
23.11.2007 |
|
|
CEN |
EN 13949:2003 Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking |
21.2.2004 |
|
|
CEN |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) |
6.10.2005 |
|
|
|
EN ISO 13982-1:2004/A1:2010 |
9.7.2011 |
Date expired (9.7.2011) |
|
CEN |
EN ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
6.10.2005 |
|
|
CEN |
EN ISO 13995:2000 Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
6.10.2005 |
|
|
CEN |
EN ISO 13997:1999 Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
4.7.2000 |
|
|
|
EN ISO 13997:1999/AC:2000 |
|
|
|
CEN |
EN ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
28.8.2003 |
EN 412:1993 |
Date expired (28.8.2003) |
CEN |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14052:2012+A1:2012 High performance industrial helmets |
20.12.2012 |
EN 14052:2012 |
Date expired (30.4.2013) |
CEN |
EN 14058:2004 Protective clothing — Garments for protection against cool environments |
6.10.2005 |
|
|
CEN |
EN ISO 14116:2008 Protective clothing — Protection against heat and flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2008) |
28.1.2009 |
EN 533:1997 |
Date expired (28.1.2009) |
|
EN ISO 14116:2008/AC:2009 |
|
|
|
CEN |
EN 14120:2003+A1:2007 Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods |
23.11.2007 |
EN 14120:2003 |
Date expired (31.12.2007) |
CEN |
EN 14126:2003 Protective clothing — Performance requirements and tests methods for protective clothing against infective agents |
6.10.2005 |
|
|
|
EN 14126:2003/AC:2004 |
|
|
|
CEN |
EN 14143:2013 Respiratory equipment — Self-contained re-breathing diving apparatus |
13.12.2013 |
EN 14143:2003 |
Date expired (31.1.2014) |
CEN |
EN 14225-1:2005 Diving suits — Part 1: Wet suits — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14225-2:2005 Diving suits — Part 2: Dry suits — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14225-3:2005 Diving suits — Part 3: Actively heated or cooled suits (systems) — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14225-4:2005 Diving suits — Part 4: One atmosphere suits (ADS) — Human factors requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14325:2004 Protective clothing against chemicals — Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
6.10.2005 |
|
|
CEN |
EN 14328:2005 Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods |
6.10.2005 |
|
|
CEN |
EN 14360:2004 Protective clothing against rain — Test method for ready made garments — Impact from above with high energy droplets |
6.10.2005 |
|
|
CEN |
EN 14387:2004+A1:2008 Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking |
20.6.2008 |
EN 14387:2004 |
Date expired (31.7.2008) |
CEN |
EN 14404:2004+A1:2010 Personal protective equipment — Knee protectors for work in the kneeling position |
6.5.2010 |
EN 14404:2004 |
Date expired (31.7.2010) |
CEN |
EN 14435:2004 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking |
6.10.2005 |
|
|
CEN |
EN 14458:2004 Personal eye-equipment — Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
6.10.2005 |
|
|
CEN |
EN ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999) |
16.3.2000 |
|
|
|
EN ISO 14460:1999/A1:2002 |
10.8.2002 |
Date expired (30.9.2002) |
|
|
EN ISO 14460:1999/AC:1999 |
|
|
|
CEN |
EN 14529:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
19.4.2006 |
|
|
CEN |
EN 14593-1:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 |
Date expired (2.12.2005) |
CEN |
EN 14593-2:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 2: Apparatus with a half mask at positive pressure — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 |
Date expired (2.12.2005) |
|
EN 14593-2:2005/AC:2005 |
|
|
|
CEN |
EN 14594:2005 Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 EN 270:1994 EN 271:1995 EN 1835:1999 EN 12419:1999 |
Date expired (2.12.2005) |
|
EN 14594:2005/AC:2005 |
|
|
|
CEN |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
6.5.2010 |
EN 14605:2005 |
Date expired (6.5.2010) |
CEN |
EN 14786:2006 Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test |
21.12.2006 |
|
|
CEN |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
28.8.2003 |
|
|
CEN |
EN ISO 15025:2002 Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000) |
28.8.2003 |
EN 532:1994 |
Date expired (28.8.2003) |
CEN |
EN ISO 15027-1:2012 Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
13.3.2013 |
EN ISO 15027-1:2002 |
Date expired (31.5.2013) |
CEN |
EN ISO 15027-2:2012 Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
13.3.2013 |
EN ISO 15027-2:2002 |
Date expired (31.5.2013) |
CEN |
EN ISO 15027-3:2012 Immersion suits — Part 3: Test methods (ISO 15027-3:2012) |
13.3.2013 |
EN ISO 15027-3:2002 |
Date expired (31.5.2013) |
CEN |
EN 15090:2012 Footwear for firefighters |
20.12.2012 |
EN 15090:2006 |
Date expired (30.4.2013) |
CEN |
EN 15151-1:2012 Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
20.12.2012 |
|
|
CEN |
EN 15333-1:2008 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus |
20.6.2008 |
|
|
|
EN 15333-1:2008/AC:2009 |
|
|
|
CEN |
EN 15333-2:2009 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus |
6.5.2010 |
|
|
CEN |
EN 15613:2008 Knee and elbow protectors for indoor sports — Safety requirements and test methods |
5.6.2009 |
|
|
CEN |
EN 15614:2007 Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland clothing |
23.11.2007 |
|
|
CEN |
EN ISO 15831:2004 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
6.10.2005 |
|
|
CEN |
EN 16027:2011 Protective clothing — Gloves with protective effect for association football goal keepers |
16.2.2012 |
|
|
CEN |
EN 16350:2014 Protective gloves — Electrostatic properties |
12.12.2014 |
|
|
CEN |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) |
11.4.2014 |
EN ISO 17249:2004 |
30.11.2015 |
|
EN ISO 17249:2013/AC:2014 |
|
|
|
CEN |
EN ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
28.1.2009 |
EN 463:1994 |
Date expired (28.2.2009) |
CEN |
EN ISO 17491-4:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008) |
28.1.2009 |
EN 468:1994 |
Date expired (28.2.2009) |
CEN |
EN ISO 20344:2011 Personal protective equipment — Test methods for footwear (ISO 20344:2011) |
16.2.2012 |
EN ISO 20344:2004 |
Date expired (30.6.2012) |
CEN |
EN ISO 20345:2011 Personal protective equipment — Safety footwear (ISO 20345:2011) |
16.2.2012 |
EN ISO 20345:2004 |
Date expired (30.6.2013) |
CEN |
EN ISO 20346:2014 Personal protective equipment — Protective footwear (ISO 20346:2014) |
12.12.2014 |
EN ISO 20346:2004 |
31.12.2014 |
CEN |
EN ISO 20347:2012 Personal protective equipment — Occupational footwear (ISO 20347:2012) |
20.12.2012 |
EN ISO 20347:2004 |
Date expired (30.4.2013) |
CEN |
EN ISO 20349:2010 Personal protective equipment — Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding — Requirements and test method (ISO 20349:2010) |
9.7.2011 |
|
|
CEN |
EN ISO 20471:2013 High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
28.6.2013 |
EN 471:2003+A1:2007 |
Date expired (30.9.2013) |
CEN |
EN 24869-1:1992 Acoustics — Hearing protectors — Subjective method for the measurement of sound attenuation (ISO 4869-1:1990) |
16.12.1994 |
|
|
Cenelec |
EN 50286:1999 Electrical insulating protective clothing for low-voltage installations |
16.3.2000 |
|
|
Cenelec |
EN 50321:1999 Electrically insulating footwear for working on low voltage installations |
16.3.2000 |
|
|
Cenelec |
EN 50365:2002 Electrically insulating helmets for use on low voltage installations |
10.4.2003 |
|
|
Cenelec |
EN 60743:2001 Live working — Terminology for tools, equipment and devices IEC 60743:2001 |
10.4.2003 |
|
Date expired (1.12.2004) |
|
EN 60743:2001/A1:2008 IEC 60743:2001/A1:2008 |
9.7.2011 |
Date expired (9.7.2011) |
|
Cenelec |
EN 60895:2003 Live working — Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. IEC #IEC 60895:2002 (Modified) |
6.10.2005 |
|
Date expired (1.7.2006) |
Cenelec |
EN 60903:2003 Live working — Gloves of insulating material IEC #IEC 60903:2002 (Modified) |
6.10.2005 |
|
Date expired (1.7.2006) |
Cenelec |
EN 60984:1992 Sleeves of insulating material for live working IEC 60984:1990 (Modified) |
4.6.1999 |
|
|
|
EN 60984:1992/A11:1997 |
4.6.1999 |
Date expired (4.6.1999) |
|
|
EN 60984:1992/A1:2002 IEC 60984:1990/A1:2002 |
10.4.2003 |
Date expired (6.10.2005) |
French